install–38 - Ibm

DANGER
Some laser products contain an embedded Class 3A or Class 3B laser
diode. Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.
Attention: When you handle static-sensitive devices, take precautions to avoid
damage from static electricity. For details about handling static-sensitive devices,
see “Handling static-sensitive devices” on page 3.
1. Remove the SFP module from its static-protective package.
2. Remove the protective cap from the SFP module, as shown in Figure 23. Save
the protective cap for future use.
Protective cap
Plastic tab
SFP module
Figure 23. Small Form-Factor Pluggable (SFP) Module
3. Remove the protective cap from the host port. Save the protective cap for future
use.
4. Insert the SFP module into the host port until it clicks into place. See Figure 24.
Fiber-optic
cable
SFP module
Raid controller
Figure 24. Installing an SFP module into the host port
5. Connect a fibre-channel cable.
Chapter 3. Cabling the storage server 27