2011 - Crane Cams

*This product is applicable only to pre-1966 California and pre-1968 federally certified passenger cars. It
is also applicable to non-emission controlled trucks and similar vehicles. It is not applicable or intended
for use on any emission controlled vehicles operated on highways or roads.
Custom Grind Cams Also Available – Call 866-388-5120 or go to cranecams.com for ordering information
CRANE VALVE TRAIN COMPONENTS
See pg. 358
VALVE SPRING
AND RETAINER
KITS
See pg. 337
VALVE
SPRINGS
See pg. 306
RETAINERS
See pg. 362
VALVE
STEM
SEALS
See pg. 360
VALVE
STEM
LOCKS
See pg. 306
PUSHRODS
See pg. 328
TIMING CHAIN
AND GEAR
ASSEMBLY
See pg. 317
__ ALUMINUM ROCKERS __
GOLD
RACE
144311-1 c 99832-16 v 99976-16 w 99818-16 j 99108-1 k 144621-16 m 144984-1 *p 144750-16 r
144833-16 e 99657-16 g 99107-1 l 144622-16 n 144985-1 *q 144759-16 s
144944-16 h 95627-16 o
144661-16 i
144312-1 b 99831-16 d 99637-16 f 99818-16 j 99108-1 k 144621-16 m 144984-1 *p 144750-16 r
144311-1 c 144833-16 e 99657-16 g 99107-1 l 144622-16 n 144985-1 *q 144759-16 s
144944-16 h 95627-16 o
144661-16 i
144311-1 c 99832-16 v 99976-16 w 99818-16 j 99108-1 k 144621-16 m 144984-1 *p 144750-16 r
144833-16 e 99657-16 g 99107-1 l 144622-16 n 144985-1 *q 144759-16 s
144944-16 h 95627-16 o
144661-16 i
144312-1 b 99831-16 d 99637-16 f 99818-16 j 99108-1 k 144621-16 m 144984-1 *p 144750-16 r
144311-1 c 144833-16 e 99657-16 g 99107-1 l 144622-16 n 144985-1 *q 144759-16 s
144944-16 h 95627-16 o
144661-16 i
a For use with standard GM alignment bars, long travel design for up to .715”valve lift and reduced
base circle camshafts.
b Contains 99831-16 single valve springs, 99637-16 titanium retainers, 99818-16 valve seals,
99108-1 valve locks.
c Contains 144833-16 dual valve springs, 144661-16 titanium retainers, 144660-16 spring seats.
99818-16 valve seals, 99108-1 valve locks.
d Single ovate wire beehive valve springs.
e Dual valve springs, requires Crane 144944-16 or 144661-16 retainers, no machining required.
2002-up cylinder heads will require Crane 144460-16 spring seats.
f Titanium, for 99831-16 single valve springs.
g Titanium, for 99831-16 single valve springs, requires Crane Multi Fit valve locks.
h Steel, for 144832-16 and 144833-16 dual valve springs.
i Titanium, for 144832-16 and 144833-16 dual valve springs.
j No machining required.
k Machined steel, heat treated.
l Machined steel, heat treated, Multi Fit.
144621-16 m 144984-1 *p 144750-16 r
144622-16 n 144985-1 *q 144759-16 s
95627-16 o
144621-16 m 144984-1 *p 144750-16 r
144622-16 n 144985-1 *q 144759-16 s
95627-16 o
m Pro Series one-piece, stock length.
n Pro Series one-piece, for use with Crane aluminum rocker arm kits (included in 144750-16 and
144759-16 kits).
o Pro Series one piece, stock length -.050”.
p Pro Series steel billet gears and roller chain set, with vernier adjustment (will not fit LS2).
q Pro Series steel billet gears and double roller chain set, three bolt, for LS2.
r 1.7 ratio, 3/8”stud, complete kit includes rocker arms, adjusting nuts, pushrod guideplates, rocker
arm studs, and pushrods.
s 1.8 ratio, 3/8”stud, complete kit includes rocker arms, adjusting nuts, pushrod guideplates, rocker
arm studs, and pushrods.
v Single ovate wire beehive valve springs, 1.450”diameter, must machine cylinder heads, requires
99976-16 retainers.
w Steel, for use with 99832-16 valve springs, requires Crane Multi Fit valve locks.
866-388-5120 • 386-236-9983 FAX 105