2011 - Crane Cams
2011 - Crane Cams
2011 - Crane Cams
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
*This product is applicable only to pre-1966 California and pre-1968 federally certified passenger cars. It<br />
is also applicable to non-emission controlled trucks and similar vehicles. It is not applicable or intended<br />
for use on any emission controlled vehicles operated on highways or roads.<br />
Custom Grind <strong>Cams</strong> Also Available – Call 866-388-5120 or go to cranecams.com for ordering information<br />
CRANE VALVE TRAIN COMPONENTS<br />
See pg. 358<br />
VALVE SPRING<br />
AND RETAINER<br />
KITS<br />
See pg. 337<br />
VALVE<br />
SPRINGS<br />
See pg. 350<br />
RETAINERS<br />
See pg. 362<br />
VALVE<br />
STEM<br />
SEALS<br />
See pg. 360<br />
VALVE<br />
STEM<br />
LOCKS<br />
11309-1 c,e 99846-16 f 99915-16 h 99820-16 d 99051-1 j 95624-16 n 10975-1 *o 11801-16 p 11774-16 r,x 11750-16 t,x<br />
11310-1 d,e 99838-16 d 99944-16 99097-1 k 10800C-16 q 11744-16 s,x 10750-16 u,x<br />
96877-16 d,h 99969-16 i 99094-1 l 10751-16 v<br />
144846-16 y 10758-16 w<br />
See pg. 306<br />
PUSHRODS<br />
See pg. 328<br />
TIMING CHAIN<br />
AND GEAR<br />
ASSEMBLY<br />
See pg. 312<br />
STEEL<br />
ROCKER<br />
ARMS<br />
See pg. 315 See pg. 317<br />
__ ALUMINUM ROCKERS __<br />
CRANE CLASSIC/ GOLD<br />
ENERGIZER RACE<br />
11309-1 c,e 99846-16 f 99915-16 h 99820-16 d 99051-1 j 95626-16 n 10975-1 *o 11801-16 p 11774-16 r,x 11750-16 t,x<br />
11310-1 d,e 99838-16 d 99944-16 99097-1 k 10800C-16 q 11744-16 s,x 10750-16 u,x<br />
96877-16 d,h 99969-16 i 99094-1 l 10751-16 v<br />
144846-16 y 10758-16 w<br />
11309-1 c,e 99846-16 f 99915-16 h 99820-16 d 99051-1 j 10621-16 m 10975-1 *o 11801-16 p 11774-16 r,x 11750-16 t,x<br />
11310-1 d,e 99838-16 d 99944-16 99097-1 k 95624-16 n 10800C-16 q 11744-16 s,x 10750-16 u,x<br />
96877-16 d,h 99969-16 i 99094-1 l 10751-16 v<br />
144846-16 y 10758-16 w<br />
11309-1 c,e 99846-16 f 99915-16 h 99820-16 d 99051-1 j 95626-16 n 10975-1 *o 11801-16 p 11774-16 r,x 11750-16 t,x<br />
11310-1 d,e 99838-16 d 99944-16 99097-1 k 10800C-16 q 11744-16 s,x 10750-16 u,x<br />
96877-16 d,h 99969-16 i 99094-1 l 10751-16 v<br />
144846-16 y 10758-16 w<br />
11309-1 c,e 99846-16 f 99915-16 h 99820-16 d 99051-1 j 95625-16 n 10975-1 *o 11801-16 p 11774-16 r,x 11750-16 t,x<br />
11310-1 d,e 99838-16 d 99944-16 99097-1 k 10800C-16 q 11744-16 s,x 10750-16 u,x<br />
96877-16 d,h 99969-16 i 99094-1 l 10751-16 v<br />
144846-16 y 10758-16 w<br />
a <strong>Cams</strong>haft incorporates an integral cast iron distributor drive gear, aluminum-bronze distributor<br />
drive gear not required.<br />
b For use with standard GM alignment bars. Required for use with camshafts having greater than<br />
stock lobe lift or reduced base circle diameters.<br />
c Contains standard diameter valve springs (99846-16), and machined steel valve stem locks<br />
(99095-1), no machining required.<br />
d Must machine cylinder heads.<br />
e Valve guide machining may be required to insure sufficient valve guide-to-retainer clearance at full<br />
valve lift due to limited travel with stock components.<br />
f Standard diameter XHTCS tool steel valve springs, no machining required.<br />
g For +.100”length valves.<br />
h For standard diameter valve springs.<br />
i Requires <strong>Crane</strong> Multi Fit valve locks.<br />
j Machined steel, heat treated, .050”additional assembly height for 99846-16 and 96802-16 valve<br />
springs. May interfere with self-aligning rocker arms.<br />
k Machined steel, heat treated.<br />
l Machined steel, heat treated, Multi Fit.<br />
m Heavy wall, heat treated, for use with either pushrod guideplate or non-guideplate cylinder heads.<br />
n Pro Series one-piece, for use with either pushrod guideplate or non-guideplate cylinder heads.<br />
o Performance steel billet gears and roller chain set (for 1987-91 applications).<br />
p 1.5 ratio, extra long slot (not self-aligning).<br />
q 1.5 ratio, extra long slot, Nitro Carb (not self-aligning).<br />
r <strong>Crane</strong> Classic extruded, 1.5 ratio (not self-aligning). Factory cast valve covers may require internalclearancing.<br />
s Energizer, 1.5 ratio (not self-aligning), will not have sufficient clearance in factory cast valve covers.<br />
t 1.5 ratio (not self-aligning). Factory cast valve covers may require internal clearancing.<br />
u 1.5 ratio, (not self-aligning), narrow body for center bolt valve covers.<br />
v 1.5 ratio, self-aligning narrow body for center bolt valve covers.<br />
w 1.6 ratio, self-aligning narrow body for center bolt valve covers.<br />
x In order to use these rocker arms on engines originally equipped with self-aligning rockers, hardened<br />
pushrod guideplates and heat-treated pushrods must be installed, and valve cover clearance checked.<br />
y Standard diameter PAC Enhanced valve springs for 1.750”assembly height.<br />
866-388-5120 • 386-236-9983 FAX 93
Change language