2011 - Crane Cams

*This product is applicable only to pre-1966 California and pre-1968 federally certified passenger cars. It
is also applicable to non-emission controlled trucks and similar vehicles. It is not applicable or intended
for use on any emission controlled vehicles operated on highways or roads.
Custom Grind Cams Also Available – Call 866-388-5120 or go to cranecams.com for ordering information
CRANE VALVE TRAIN COMPONENTS
See pg. 358
VALVE SPRING
AND RETAINER
KITS
See pg. 337
VALVE
SPRINGS
See pg. 350
RETAINERS
See pg. 362
VALVE
STEM
SEALS
See pg. 360
VALVE
STEM
LOCKS
11310-1 d 99838-16 d 99944-16 99820-16 d 99097-1 k 11621-16 m 11975-1 *o 11801C-16 r 11774-16 t 11750-16 v
96874-16 g 99969-16 i 99094-1 l 11630-16 n 11984-1 *p 10800C-16 s 11744-16 u 10750-16 w
11977-1 *q 10751-16 x
See pg. 306
PUSHRODS
See pg. 328
TIMING CHAIN
AND GEAR
ASSEMBLY
See pg. 312
STEEL
ROCKER
ARMS
See pg. 315 See pg. 317
__ ALUMINUM ROCKERS __
CRANE CLASSIC/ GOLD
ENERGIZER RACE
11309-1 e,f 96802-16 h 99915-16 j 99820-16 d 99097-1 k 11621-16 m 11975-1 *o 11801C-16 r 11774-16 t 11750-16 v
11310-1 d 99846-16 f 99944-16 99094-1 l 11630-16 n 11984-1 *p 10800C-16 s 11744-16 u 10750-16 w
99838-16 d 99969-16 i 11977-1 *q 10751-16 x
96874-16 g
11309-1 e,f 96802-16 h 99915-16 j 99820-16 d 99097-1 k 11621-16 m 11975-1 *o 11801C-16 r 11774-16 t 11750-16 v
11310-1 d 99846-16 f 99944-16 99094-1 l 11630-16 n 11984-1 *p 10800C-16 s 11744-16 u 10750-16 w
99838-16 d 99969-16 i 11977-1 *q 10751-16 x
96874-16 g
11310-1 d 99838-16 d 99944-16 99820-16 d 99097-1 k 11621-16 m 11975-1 *o 11801C-16 r 11774-16 t 11750-16 v
96874-16 g 99969-16 i 99094-1 l 11630-16 n 11984-1 *p 10800C-16 s 11744-16 u 10750-16 w
11977-1 *q 10751-16 x
11310-1 d 99838-16 d 99944-16 99820-16 d 99097-1 k 11621-16 m 11975-1 *o 11801C-16 r 11774-16 t 11750-16 v
96874-16 g 99969-16 i 99094-1 l 11630-16 n 11984-1 *p 10800C-16 s 11744-16 u 10750-16 w
11977-1 *q 10751-16 x
11309-1 e,f 99846-16 f 99915-16 j 99097-1 k 11630-16 n 11975-1 *o 11801C-16 r
11984-1 *p 10800C-16 s
11977-1 *q
11310-1 d 99838-16 d 99944-16 99820-16 d 99097-1 k 11621-16 m 11975-1 *o 11801C-16 r 11774-16 t 11750-16 v
96874-16 g 99969-16 i 99094-1 l 11630-16 n 11984-1 *p 10800C-16 s 11744-16 u 10750-16 w
11977-1 *q 10751-16 x
a Cam, lifter, and valve spring (99846-16) kit, includes installation lubricants. Contains standard
diameter valve springs, no machining required.
b Cam and Lifter Kit, includes assembly lubricants.
c Optional Hi Intensity Lifters, see page 292 for details.
d Must machine cylinder heads.
e Contains standard diameter valve springs and machined steel valve stem locks (99095-1), no
machining required.
f Standard diameter XHTCS tool steel valve springs for 1.800”assembly height.
g Dual valve springs for +.100”length valves.
h Standard diameter chrome silicon valve springs for 1.750”assembly height.
i Requires Crane Multi Fit valve locks.
j For standard diameter valve springs, no machining required.
k Machined steel, heat treated.
l Machined steel, heat treated, Multi Fit.
m Heavy wall, heat treated, for use with or without pushrod guideplate cylinder heads.
n Heavy wall, heat treated, for use with or without pushrod guideplate cylinder heads.
o Performance steel billet gears and roller chain set.
p Pro Series steel billet gears and roller chain set.
q Pro Series steel billet gears and roller chain set with thrust bearing.
r 1.5 ratio, 3/8”stud, extra long slot, Nitro Carb (not self-aligning).
s 1.5 ratio, 3/8”stud, self-aligning, Nitro Carb.
t Crane Classic extruded, 1.5 ratio, 3/8”stud (not self-aligning).
u Energizer, 1.5 ratio, 3/8”stud (not self-aligning).
v 1.5 ratio, 3/8”stud (not self-aligning).
w 1.5 ratio, 3/8”stud (not self-aligning), narrow body for center bolt valve covers.
x 1.5 ratio, 3/8”stud, self-aligning narrow body for center bolt valve covers.
866-388-5120 • 386-236-9983 FAX 67