2011 - Crane Cams

More documents

Recommendations

Info

VALVE TRAIN Valve Spring Retainer Dimensions - Steel Valve Stem Diam. Spring O.D., Type and Special Applications --------Retainer Dimensions-------- A B C Part No. 7° Multi Fit Steel Retainers for 5/16”, 11/32”, and 3/8” Valve Stem Diameters For 5/16” square groove valve stems: use 99093-1 (standard), 99085-1 (+.050”), or 99086-1 (-.050”) valve stem locks For 11/32” square groove valve stems: use 99094-1 (standard), 99087-1 (+.050”), or 99088-1 (-.050”) valve stem locks For 3/8” square groove valve stems: use 99098-1 (standard), 99099-1 (+.050”), or 99089-1 (-.050”) valve stem locks Valve stem locks for 5/16”, 11/32”, and 3/8” valve stems with bead groove configuration also available, see pages 360-361. ALL 1.275” Dual 1.250 .910 .650 99975- ALL 1.055/1.290” to 1.095/1.445” Conical Single .980 .640 99976- ALL 1.430” to 1.500” Dual 1.375 1.030 .675 99950- ALL 1.430” to 1.500” Dual or Triple 1.375 1.060 .675 99948- ALL 1.430” to 1.500” Dual or Triple 1.375 1.060 .675 99957- ALL 1.430” to 1.500” Single or Dual 1.425 1.060 .685 99969- ALL 1.430” to 1.500” Single or Dual 1.425 1.060 .685 99973- ALL 1.460” Dual 1.375 1.075 .792 99954- ALL 1.510” to 1.625” Dual 1.500 1.100 .690 99970- ALL 1.510” to 1.625” Dual 1.500 1.100 .690 99974- ALL 1.530” Dual 1.500 1.111 .765 99962- ALL 1.540” Dual 1.500 1.135 .725 99964- ALL 1.540” Dual 1.500 1.135 .725 99961- ALL 1.540” to 1.630 Dual or Triple 1.500 1.135 .635 99955- 7° Steel Retainers for Specific Valve Stem Diameters and Applications 8mm 1.275” Dual Chevrolet LS1/LS2/LS6 V-8 1.250 .910 .640 144944- 1.225” to 1.250” Single or Dual 11/32” for self-aligning rocker arms 1.210 .865 .595 99914- 11/32” 1.225” to 1.250” Single or Dual 1.203 .867 .607 99916- 11/32” 1.225” to 1.250” Single or Dual 1.203 .867 .607 99915- 1.295” top / 1.450” bottom Conical Single 11/32” Ford 302 H.O. V-8 1.250 .859 99942- 11/32” 1.320” Dual Ford SOHC 2.3L I-4 1.250 .985 .745 99967- 11/32” 1.344” Dual Chevy L98/Fast Burn alum. heads 1.275 .990 .720 99935- 11/32” 1.430” to 1.500” Single or Dual 1.375 1.030 .675 99946- 11/32” 1.430” to 1.500” Single or Dual 1.375 1.060 .675 99936- 11/32” 1.430” to 1.500” Single or Dual 1.375 1.060 .675 99944- 11/32” 1.430” to 1.500” Single or Dual 1.375 1.060 .675 99943- 11/32” 1.460” Dual 1.375 1.075 .792 99953- 11/32” 1.460” Dual for self-aligning rocker arms 1.375 1.075 .792 99951- 11/32” 1.540” to 1.630” Dual or Triple 1.500 1.135 .635 99956- 10° Multi Fit Steel Retainers For 5/16” square groove valve stems: use 99071-1 (standard), 99072-1 (+.050”), or 99070-1 (-.050”) valve stem locks For 11/32” square groove valve stems: use 99074-1 (standard), 99075-1 (+.050”), or 99073-1 (-.050”) valve stem locks For 3/8” square groove valve stems: use 99077-1 (standard), 99078-1 (+.050”), or 99076-1 (-.050”) valve stem locks Valve stem locks for 5/16”, 11/32”, and 3/8” valve stems with bead groove configuration also available, see pages 360-361. ALL 1.430” to 1.500” Single or Dual 1.425 1.060 .685 99971- ALL 1.510” to 1.625” Dual 1.500 1.100 .690 99972- NOTE: These recommended locks differ from competing conventional 10° locks and they increase the breakage strength of our Multi-Fit titanium retainers by 25%. Also, many competing 10 degree locks vary in production from 9° to 11-1/2°. Because of the accurate, robust design of Crane locks, they are incompatible with most competitors 10° retainers, and competitor’s locks won’t work with Crane Multi Fit 10° retainers. Steel Retainers with Unique Taper for Specific Applications 11/32” 1.225” to 1.250” Single or Dual for Buick, 11° Taper 1.200 .867 .599 99912- 3/8” 1.430” to 1.500” Dual for Buick, 11° Taper 1.375 1.075 .698 99910- NOTE: The retainers are packaged in various quantities depending on the engine application. The suffix number (after the dash) in thepart number indicates the quantity. For example, part no 99944-16 would be packaged with 16 retainers. Consult the engine application pages or the numerical price list for the correct quantity suffix. NOTE: See pages 352-354 for our new Retainer Height Chart. 350 CRANECAMS.COM
Valve Spring Retainer Dimensions - Titanium Valve Stem Diam. Spring O.D., Type and Special Applications --------Retainer Dimensions-------- A B C Part No. 7° Multi Fit Titanium Retainers for 5/16”, 11/32”, and 3/8” Valve Stem Diameters For 5/16” square groove valve stems: use 99093-1 (standard), 99085-1 (+.050”), or 99086-1 (-.050”) valve stem locks For 11/32” square groove valve stems: use 99094-1 (standard), 99087-1 (+.050”), or 99088-1 (-.050”) valve stem locks For 3/8” square groove valve stems: use 99098-1 (standard), 99099-1 (+.050”), or 99089-1 (-.050”) valve stem locks Valve stem locks for 5/16”, 11/32”, and 3/8” valve stems with bead groove configuration also available, see pages 360-361. ALL 1.275” Dual 1.250 .918 .640 99657- ALL 1.500” to 1.550” Dual 1.400 1.040 .715 99663- ALL 1.530” to 1.550” Dual 1.440 1.105 .687 99659- ALL 1.540” to 1.595” Dual 1.500 1.150 .720 99655- ALL 1.550” Dual 1.440 1.090 .695 99661- ALL 1.625” Dual 1.510 1.165 .760 99660- ALL 1.625” to 1.675” Triple 1.500 1.180/.860 .620 99656- ALL 1.645” Triple 1.530 1.185 .860 99662- 7° Titanium Retainers for Specific Valve Stem Diameters and Applications 5.5mm 1.000” Single Ford Duratec 1.8 – 2.3L DOHC 4 Valve I-4 .945 .710 903-0503 6mm .999” top/1.095” bottom Beehive Single Ford 4.6 - 5.4L 3 Valve V-8 .885 .615 39660- 6mm 1.065” Single Chrysler/Dodge SOHC/DOHC 4 Valve I-4 .995 .715 158660- 7mm .930” top/1.025” bottom Beehive Single Ford 4.6 - 5.4L 4 Valve V-8 .850 .560 40660- 7mm .967” top/1.096” bottom Beehive Single Ford 4.6 - 5.4L 2 Valve V-8 .885 .615 .503 37660- 8mm 1.055” top/1.290” bottom Beehive Single Chevrolet LS1/LS2/LS6 V-8 .974 .620 99637- 8mm 1.255” Single 1.180 .856 99658- 8mm 1.275” Dual Chevrolet LS1/LS2/LS6 V-8 1.250 .910 .640 144661- 7° Posi-Stop Titanium Retainers for Specific Valve Stem Diameters 11/32” 1.430” to 1.500” Dual 1.375 1.045 .703 99669- 11/32” 1.540” Dual 1.500 1.135 .740 99675- 11/32” 1.560” to 1.630” Triple 1.500 1.135 .635 99678- 11/32” 1.560” to 1.630” Triple 1.500 1.135 .635 99681- 3/8” 1.540” Dual 1.500 1.135 .740 99676- 3/8” 1.560” to 1.630” Triple 1.500 1.135 .635 99679- NOTE: All “Posi-Stop” Titanium Retainers are packaged with appropriate Crane Cams machined valve stem locks. 10° Crane Multi Fit Titanium Retainers For 5/16” square groove valve stems: use 99071-1 (standard), 99072-1 (+.050”), or 99070-1 (-.050”) valve stem locks For 11/32” square groove valve stems: use 99074-1 (standard), 99075-1 (+.050”), or 99073-1 (-.050”) valve stem locks For 3/8” square groove valve stems: use 99077-1 (standard), 99078-1 (+.050”), or 99076-1 (-.050”) valve stem locks Valve stem locks for 5/16”, 11/32”, and 3/8” valve stems with bead groove configuration also available, see pages 360-361. ALL 1.540” to 1.595” Dual 1.500 1.150 .720 99635- ALL 1.625” to 1.675” Triple 1.500 1.180/.860 .620 99636- NOTE: These recommended locks differ from competing conventional 10° locks and they increase the breakage strength of our Multi-Fit titanium retainers by 25%. Also, many competing 10 degree locks vary in production from 9° to 11-1/2°. Because of the accurate, robust design of Crane locks, they are incompatible with most competitors 10° retainers, and competitor’s locks won’t work with Crane Multi Fit 10° retainers. 10° Conventional Titanium Retainers ALL 1.430” to 1.500” Dual or Triple 1.375 1.060 .675 99630- ALL 1.500” to 1.550” Dual 1.400 1.040 .715 99640- ALL 1.550” Dual 1.440 1.090 .695 99639- ALL 1.540” to 1.560” Dual 1.500 1.120 .735 99631- ALL 1.550” to 1.560” Dual 1.500 1.095 .700 99634- ALL 1.560” to 1.630” Triple 1.500 1.135 .635 99632- ALL 1.625” Dual 1.500 1.170 .764 99633- ALL 1.625” Dual 1.510 1.165 .760 99638- NOTE: These retainers can be used with 11/32” or 3/8” valve stems with single keeper grooves provided that the appropriate conventional 10 degree valve stem locks are used: 99080-1 for 5/16”; 99081-1 for 11/32”; 99082-1 for 3/8”. NOTE: The retainers are packaged in various quantities depending on the engine application. The suffix number (after the dash) in the part number indicates the quantity. For example, part no 99944-16 would be packaged with 16 retainers. Consult the engine application pages or the numerical price list for the correct quantity suffix. NOTE: See pages 352-354 for our new Retainer Height Chart. 866-388-5120 • 386-236-9983 FAX 351
Page 1 and 2:
MASTER CATALOG CAMSHAF TS • VALVE
Page 3 and 4:
How to Use This Catalog About the C
Page 5 and 6:
Table of Contents Timing Chains and
Page 7 and 8:
Crane Cams History Crane Cams Histo
Page 9 and 10:
Camshaft Table of Contents Chrysler
Page 11 and 12:
Crane Camshaft Series Crane Camshaf
Page 13 and 14:
Crane Cams & Valve Train Products S
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Duration@ .050” Advertised Durati
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
*This product is applicable only to
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
1992-1996 305 (5.0L)- 350 (5.7L) LT
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Other sizes are available on reques
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
1986-1991 318 (5.2L) & 1987-1991 36
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Street roller camshafts are also of
Page 171 and 172:
Custom Grind Cams Also Available -
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
1969-1993 351 (5.8L) cu.in. Windsor
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
nuts can be installed to permit ind
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Oldsmobile DRCE V8 The DRCE (Drag R
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Cam and Valve Train Buyer’s Guide
Page 287 and 288:
Camshaft Components Cam Degreeing B
Page 289 and 290:
Distributor-Magneto Drive Gears Cop
Page 291 and 292:
Distributor-Magneto Drive Gears Coa
Page 293 and 294:
Lifters - Hydraulic and Mechanical
Page 295 and 296:
Lifters - Hydraulic Roller Hydrauli
Page 297 and 298:
Lifters - Mechanical Roller Mechani
Page 299 and 300: Lifters - Mechanical Roller Pushrod
Page 301 and 302: Lifters - Mechanical Roller Applica
Page 303 and 304: Lifters - Mechanical Roller Applica
Page 305 and 306: Lubricants Assembly Lube (Paste) Cr
Page 307 and 308: Pushrods Overall Ends Application C
Page 309 and 310: Pushrods - One Piece Pro Series, On
Page 311 and 312: Pushrod Accessories Pushrod Guidepl
Page 313 and 314: Rocker Arms, Steel & Ductile Iron A
Page 315 and 316: Aluminum Rocker Arms, Energizer Ene
Page 317 and 318: Aluminum Roller Rockers, Gold Race
Page 319 and 320: Aluminum Roller Rockers, Gold Race
Page 321 and 322: Aluminum Shaft Mount Rocker Arms Ne
Page 323 and 324: Rocker Arm Adjusting Nuts, Screws R
Page 325 and 326: Rocker Arm Guideplate Conversion Ki
Page 327 and 328: Rocker Arm Studs Rocker Arm Studs C
Page 329 and 330: Timing Chains and Components Pro-Se
Page 331 and 332: Tools Pushrods, Adjustable Checking
Page 333 and 334: Vacuum Kits and Accessories Adjusta
Page 335 and 336: Valve Train Questions Valve Spring
Page 337 and 338: Valve Springs O.D I.D. Damper Seat
Page 339 and 340: Valve Springs O.D I.D.1 I.D.2 Dampe
Page 341 and 342: Valve Springs Valve Spring Spec Cha
Page 349: Valve Spring Retainers How to Use t
Page 353 and 354: Valve Spring Retainer Height Chart
Page 355 and 356: Valve Spring to Retainer Cross Refe
Page 357 and 358: Valve Spring to Retainer Cross Refe
Page 359 and 360: Valve Spring and Retainer Kits Valv
Page 361 and 362: Valve Stem Locks Multi-Fit Valve St
Page 363 and 364: Valve Train Stabilizers Durable ste
Page 365 and 366: How to Identify Your Crane Cam SERI
Page 367 and 368: Street/Strip, Off Road, Marine Cams
Page 369 and 370: Finish Grind Crane Round Lobe Outri
Page 371 and 372: Other Engine Applications Ford, Lin
Page 373 and 374: Flat Tappet Camshaft Break-in Proce
Page 375 and 376: Adjusting the Valve Train Hydraulic
Page 377 and 378: Commonly Asked Valve Spring Questio
Page 379 and 380: Cam and Valve Train Questions Commo
Page 381 and 382: Degreeing the Cam Degreeing the Cam
Page 383 and 384: Degreeing the Cam Degreeing the Cam
Page 385 and 386: Understanding the Cam Specification
Page 387 and 388: Ignition Table of Contents HI-6S Mu
Page 389 and 390: Street Performance, Trucks, Trailer
Page 391 and 392: Street, Street Performance, Race HI
Page 393 and 394: Street Performance, Race HI-6R/Digi
Page 395 and 396: Street Performance, Race, Turbo HI-
Page 397 and 398: Street Performance, Race, Turbo HI-
Page 399 and 400: Oval Track, Race HI-6N CD Ignition
Page 401 and 402:
Timing Retard Timing Retard Control
Page 403 and 404:
Points Conversion Ignition XR-i Poi
Page 405 and 406:
Points Conversion Ignition XR700 Re
Page 407 and 408:
Points Conversion Ignition XR3000 R
Page 409 and 410:
Distributors Race Billet Distributo
Page 411 and 412:
Distributors Oval Track Pro Race Di
Page 413 and 414:
Performance Ignition Coils LX91, LX
Page 415 and 416:
Performance Ignition Coils PS91, PS
Page 417 and 418:
Performance Plug Wires 8.5mm Fire W
Page 419 and 420:
FireWire Spark Plug Wire Now Availa
Page 421 and 422:
Part Number Index Part No. Page No.
Page 423 and 424:
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
Page 433 and 434:
show all

2011 - Crane Cams

Create successful ePaper yourself

Delete template?

Save as template?