2011 - Crane Cams

Rocker Arm Guideplate Conversion Kits
Rocker Arm Guideplate Conversion Kits
Converts Pedestal-Mount Dodge and Ford Cylinder Heads to Adjustable
Rocker Arms
Crane Cams’ rocker arm stud/pushrod guideplate conversion kits enable you
to convert late-model Dodge and Ford V-8 engines with pedestal mount rocker
arms to an adjustable-type valve train without machine work or cylinder
head removal. These kits allow standard pushrods to be retained, in most
instances, as the guideplate uses a special composite insert that prevents metal-to-metal
contact. Each kit includes guideplates, guideplate inserts, studs,
stud installation nut, and complete instructions. (Rocker arms, adjusting nuts,
and pushrods are not included.) These kits are intended for mild performance
applications using hydraulic lifter or hydraulic roller cams, and are not recommended
for competition usage.
Description Part No.
Dodge 92-02, Magnum V-8 318 (5.2L) and 360 (5.9L) engines with 5/16”-18 threaded stud bosses. Must use
11746-16 or 11759-16 aluminum rocker arms for 3/8” rocker arm studs and 5/16” dia. 36621-16
(heat treated) pushrods.
Dodge 92-02, Magnum V-8 318 (5.2L) and 360 (5.9L) engines with 5/16”-18 threaded stud bosses. Must use
11747-16 or 11755-16 aluminum rocker arms for 7/16” rocker arm studs and 5/16” dia. 36621-16
(heat treated) pushrods.
Dodge Aluminum Magnum and Crate Motor cylinder heads with 3/8”-16 threaded stud bosses. Must use 11746-16
or 11759-16 aluminum rocker arms for 3/8” rocker arm studs and 5/16” dia. 36621-16
(heat treated) pushrods.
Ford V-8 77-00, 255-302, 302 H.O., 351W engines. Will accept 3/8” stud die-formed steel or Crane aluminum rocker
arms and 5/16” diameter pushrods.
Ford V-8 77-00, 255-302, 302 H.O., 351W engines. Will accept 7/16” stud Crane aluminum rocker arms and 5/16”
diameter pushrods.
Ford V-8 70-82, 351C, 351M, 400, and Ford V-8 72-97, 370-429-460 engines. Will accept 7/16” stud die-formed
steel or Crane aluminum rocker arms and 5/16” dia. pushrods.
Ford V-8 72-97, 370, 429, 460 Engines. Will accept 7/16” stud die-formed steel or Crane aluminum rocker arms
and 3/8” diameter pushrods.
36655-16
(Drawing A)
36656-16
(Drawing A)
70655-16
(Drawing A)
36655-16
(Drawing A)
36656-16
(Drawing A)
52655-16
(Drawing B)
35655-16
(Drawing B)
Replacement guideplate insert for 5/16” diameter pushrods (included in kits) 52655GB-16
Replacement guideplate insert for 3/8” diameter pushrods (included in kits) 35655GB-16
Drawing A
Drawing B
866-388-5120 • 386-236-9983 FAX 325