2011 - Crane Cams

*This product is applicable only to pre-1966 California and pre-1968 federally certified passenger cars. It
is also applicable to non-emission controlled trucks and similar vehicles. It is not applicable or intended
for use on any emission controlled vehicles operated on highways or roads.
Custom Grind Cams Also Available – Call 866-388-5120 or go to cranecams.com for ordering information
CRANE VALVE TRAIN COMPONENTS
See pg. 358
VALVE SPRING
AND RETAINER
KITS
See pg. 337
VALVE
SPRINGS
See pg. 350
RETAINERS
See pg. 362
VALVE
STEM
SEALS
See pg. 360
VALVE
STEM
LOCKS
11308-1 b 99848-16 b 99915-16 99041-1 10621-16 e 10975-1 *g 11801-16 h,i 11774-16 l,i 11750-16 n,i
144846-16 r 99097-1 d 95624-16 f 11806-16 j,i 11744-16 m,i 10750-16 o,i
10800C-16 k 10751-16 p
10758-16 q
See pg. 306
PUSHRODS
See pg. 328
TIMING CHAIN
AND GEAR
ASSEMBLY
See pg. 312
STEEL
ROCKER
ARMS
See pg. 315 See pg. 317
__ ALUMINUM ROCKERS __
CRANE CLASSIC/ GOLD
ENERGIZER RACE
11308-1 b 99848-16 b 99915-16 99041-1 10621-16 e 10975-1 *g 11801-16 h,i 11774-16 l,i 11750-16 n,i
144846-16 r 99097-1 d 95624-16 f 11806-16 j,i 11744-16 m,i 10750-16 o,i
10800C-16 k 10751-16 p
10758-16 q
11308-1 b 99848-16 b 99915-16 99041-1 10621-16 e 10975-1 *g 11801-16 h,i 11774-16 l,i 11750-16 n,i
144846-16 r 99097-1 d 95624-16 f 11806-16 j,i 11744-16 m,i 10750-16 o,i
10800C-16 k 10751-16 p
10758-16 q
96802-16 c 99915-16 99097-1 d 10621-16 e 10975-1 *g 11801-16 h,i 11774-16 l,i 11750-16 n,i
144846-16 r 95624-16 f 11806-16 j,i 11744-16 m,i 10750-16 o,i
10800C-16 k 10751-16 p
10758-16 q
96802-16 c 99915-16 99097-1 d 10621-16 e 10975-1 *g 11801-16 h,i 11774-16 l,i 11750-16 n,i
144846-16 r 95624-16 f 11806-16 j,i 11744-16 m,i 10750-16 o,i
10800C-16 k 10751-16 p
10758-16 q
96802-16 c 99915-16 99097-1 d 10621-16 e 10975-1 *g 11801-16 h,i 11774-16 l,i 11750-16 n,i
144846-16 r 95624-16 f 11806-16 j,i 11744-16 m,i 10750-16 o,i
10800C-16 k 10751-16 p
10758-16 q
a For use with standard GM alignment bars.
b Contains standard diameter valve springs, no machining required.
c Standard diameter valve springs, for 1.750”assembly height.
d Machined steel, heat treated.
e Heavy wall, heat treated, for use with either pushrod guideplate or non-guideplate cylinder heads.
f Pro Series, one-piece
g Performance steel billet gears and roller chain set, for 1987-91 applications.
h 1.5 ratio, extra long slot (not self-aligning).
i In order to use these rocker arms on engines originally equipped with self-aligning rockers, hardened
pushrod guideplates must be installed, and valve cover clearance checked.
j 1.5 ratio, roller tip, extra long slot (not self-aligning).
k 1.5 ratio, self-aligning, Nitro Carb.
l Crane Classic extruded, 1.5 ratio (not self-aligning). Factory cast valve covers may require internal
clearancing.
m Energizer, 1.5 ratio (not self-aligning).Will not have sufficient clearance in factory cast valve covers.
n 1.5 ratio (not self-aligning). Factory cast valve covers may require internal clearancing.
o 1.5 ratio (not self-aligning), narrow body for center bolt valve covers.
p 1.5 ratio, self-aligning narrow body for center bolt valve covers.
q 1.6 ratio, self-aligning narrow body for center bolt valve covers.
r Standard diameter PAC Enhanced valve springs for 1.750”assembly height.
866-388-5120 • 386-236-9983 FAX 89