2011 - Crane Cams
2011 - Crane Cams
2011 - Crane Cams
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
*This product is applicable only to pre-1966 California and pre-1968 federally certified passenger cars. It<br />
is also applicable to non-emission controlled trucks and similar vehicles. It is not applicable or intended<br />
for use on any emission controlled vehicles operated on highways or roads.<br />
Custom Grind <strong>Cams</strong> Also Available – Call 866-388-5120 or go to cranecams.com for ordering information<br />
CRANE VALVE TRAIN COMPONENTS<br />
See pg. 358<br />
VALVE SPRING<br />
AND RETAINER<br />
KITS<br />
See pg. 337<br />
VALVE<br />
SPRINGS<br />
See pg. 350<br />
RETAINERS<br />
See pg. 362<br />
VALVE<br />
STEM<br />
SEALS<br />
See pg. 360<br />
VALVE<br />
STEM<br />
LOCKS<br />
44308-1 f 96870-16 g 99943-16 99820-16 g 99097-1 i 95636-16 k 44975-1 *m 36801-16 o 36774-16 q 36750-16 t<br />
99969-16 h 99087-1 j 95640-16 l 44984-1 *n 36800-16 p 11746-16 r 36759-16 u<br />
44746-16 s 36758-16 v<br />
See pg. 306<br />
PUSHRODS<br />
See pg. 328<br />
TIMING CHAIN<br />
AND GEAR<br />
ASSEMBLY<br />
See pg. 312<br />
STEEL<br />
ROCKER<br />
ARMS<br />
See pg. 315 See pg. 317<br />
__ ALUMINUM ROCKERS __<br />
CRANE CLASSIC/ GOLD<br />
ENERGIZER RACE<br />
44308-1 f 96870-16 g 99943-16 99820-16 h 99097-1 i 95636-16 k 44975-1 *m 36801-16 o 36774-16 q 36750-16 t<br />
99969-16 h 99087-1 j 95640-16 l 44984-1 *n 36800-16 p 11746-16 r 36759-16 u<br />
44746-16 s 36758-16 v<br />
96870-16 g 99943-16 99820-16 h 99097-1 i 95636-16 k 44975-1 *m 36801-16 o 36774-16 q 36750-16 t<br />
99969-16 h 99087-1 j 95640-16 l 44984-1 *n 36800-16 p 11746-16 r 36759-16 u<br />
44746-16 s 36758-16 v<br />
96870-16 g 99943-16 99820-16 h 99097-1 i 95636-16 k 44975-1 *m 36801-16 o 36774-16 q 36750-16 t<br />
99969-16 h 99087-1 j 95640-16 l 44984-1 *n 36800-16 p 11746-16 r 36759-16 u<br />
44746-16 s 36758-16 v<br />
96870-16 g 99943-16 99820-16 h 99097-1 i 95636-16 k 44975-1 *m 36801-16 o 36774-16 q 36750-16 t<br />
99969-16 h 99087-1 j 95640-16 l 44984-1 *n 36800-16 p 11746-16 r 36759-16 u<br />
44746-16 s 36758-16 v<br />
a <strong>Cams</strong>haft has standard base circle diameter, for use with 36532-16 or 36560-16 hydraulic roller<br />
lifters. Also applicable to 94-97 351W engines.<br />
b Requires 36970-1 (.467” I.D.) or 44970-1 (.531” I.D.) steel, or 36990-1 (.467” I.D.) or 44990-1<br />
(.531” I.D.) aluminum-bronze distributor drive gear.<br />
c Cam and spring kit, includes 44308-1 kit, containing valve springs, valve spring retainers, and valve<br />
stem locks.<br />
d For use with standard Ford alignment bars, on engines originally equipped with hydraulic roller lifters.<br />
e Vertical locking bar hydraulic roller lifters, no machining required. Cylinder head removal required in<br />
82-84 302 H.O. applications. Appropriate pushrods required.<br />
f Optional spring, retainer, and lock kit for 79-93 engines, no machining required.<br />
g Must machine cylinder heads.<br />
h Requires <strong>Crane</strong> Multi Fit valve locks.<br />
i Machined steel, heat treated.<br />
j Machined steel, heat treated, Multi Fit.<br />
k Pro Series one-piece, for 351W engines with non-adjustable pedestal mount rocker arms.<br />
l Pro Series one -piece, for 351W engines with adjustable rocker arms with Pushrod Guideplate<br />
Conversion Kit (36655-16). See page 325 for details.<br />
m For 73-93 engines, performance steel billet gears and roller chain set.<br />
n For 73-93 engines, Pro Series steel billet gears and roller chain set.<br />
Section Continued<br />
o 1.6 ratio, cast, rail type for 3/8” studs. Non-adjustable with 5/16” top bottleneck studs, adjustable<br />
with straight 3/8” studs and locking nuts.<br />
p 1.6 ratio, cast, non-rail type for 3/8” studs, must machine cylinder heads and install 99156-16<br />
rocker arm studs and 36650-1 pushrod guideplates, or use 36655-16 Conversion Kit on 77-93<br />
pedestal mount cylinder heads for street applications.<br />
q <strong>Crane</strong> Classic extruded, 1.6 ratio 3/8” stud, must machine 1966-00 cylinder heads and install<br />
99156-16 rocker arm studs and 36650-1 pushrod guideplates, or use 36655-16 Conversion Kit<br />
on 1977-00 pedestal mount cylinder heads for street applications.<br />
r Energizer, 1.6 ratio 3/8” stud, must machine 1966-00 cylinder heads and install 99156-16 rocker<br />
arm studs and 36650-1 pushrod guideplates, or use 36655-16 Conversion Kit on 1977-00<br />
pedestal mount cylinder heads for street applications.<br />
s Energizer, 1.7 ratio, non-adjustable, for pedestal mount cylinder heads, no machining required,<br />
includes Rocker Arm Pedestal Shim Kit.<br />
t 1.6 ratio, 3/8” stud, must machine cylinder heads and install 99156-16 rocker arm studs and<br />
36650-1 pushrod guideplates, or use 36655-16 Conversion Kit on 77-93 pedestal mount cylinder<br />
heads for street applications.<br />
u 1.6 ratio, non-adjustable, for 77-93 pedestal mount cylinder heads, no machining required, includes<br />
Rocker Arm Pedestal Shim Kit.<br />
v 1.7 ratio, non-adjustable, for 77-93 pedestal mount cylinder heads, no machining required, includes<br />
Rocker Arm Pedestal Shim Kit.<br />
866-388-5120 • 386-236-9983 FAX 221