2011 - Crane Cams

Pushrod Accessories
Pushrod Guideplates
Crane’s pushrod guideplates feature a significant increase in strength over stock designs.
Their unique design provides a more rigid guide, reduces flexing, stabilizes the pushrod
and reduces rocker arm “wander.” All sets include 8 guideplates.
Heat treated and carburized pushrods must be used with these guideplates, or premature
pushrod wear and failure will occur. Cylinder head machining and screw-in rocker
arm studs may be required to install these guideplates. Refer to the engine application and
rocker arm pages for additional information.
Application Pushrod Diameter Part No.
Chevrolet 90° V-6 78-86, 200 thru 262
Chevrolet V-8 55-95, 262 thru 400
Chevrolet V-8 97-10, LS1-LS2-LS6 5.7L Vortec 4800, 5300, 6000
(for use with Crane adjustable rocker arms)
Chevrolet V-8 08-10, L92 cylinder heads
(for use with Crane adjustable rocker arms)
5/16” 11650-1
5/16” 11650-1
5/16” 144650-1
3/8” 144651-1
5/16” 201650-1
3/8” 201651-1
Chevrolet V-8 65-90, 396 thru 454 and 502
3/8” 13650-1
Ford V-8 62-92, 221 thru 302 and 351W
5/16” 36650-1
Ford V-8 69-82, 351C-351M-400
5/16” 52650-1
Rocker Arm Guideplate Conversion Kits
Converts Pedestal-Mount Dodge and Ford Cylinder Heads to Adjustable Rocker Arms
Crane Cams’ rocker arm stud/pushrod guideplate conversion kits enable you to convert latemodel
Dodge and Ford V-8 engines with pedestal mount rocker arms to an adjustable-type
valve train without machine work or cylinder head removal. Detailed description on page 325.
Description Part No.
Dodge 92-02, MagnumV-8 318 (5.2L) and 360 (5.9L) engines with 5/16”-18 threaded stud bosses. Must use
11746-16 or 11759-16 aluminum rocker arms for 3/8”rocker arm studs and 5/16”dia. 36621-16
(heat treated) pushrods.
Dodge 92-02, MagnumV-8 318 (5.2L) and 360 (5.9L) engines with 5/16”-18 threaded stud bosses. Must use
11747-16 or 11755-16 aluminum rocker arms for 7/16”rocker arm studs and 5/16”dia. 36621-16
(heat treated) pushrods.
Dodge Aluminum Magnum and Crate Motor cylinder heads with 3/8”-16 threaded stud bosses. Must use 11746-16
or 11759-16 aluminum rocker arms for 3/8”rocker arm studs and 5/16”dia. 36621-16
(heat treated) pushrods.
FordV-8 77-00, 255-302, 302 H.O., 351W engines.Will accept 3/8”stud die-formed steel or Crane aluminum rocker
arms and 5/16”diameter pushrods.
FordV-8 77-00, 255-302, 302 H.O., 351W engines.Will accept 7/16” stud Crane aluminum rocker arms and 5/16”
diameter pushrods.
FordV-8 70-82, 351C, 351M, 400, and FordV-8 72-97, 370-429-460 engines.Will accept 7/16”stud die-formed
steel or Crane aluminum rocker arms and 5/16”dia. pushrods.
FordV-8 72-97, 370, 429, 460 Engines.Will accept 7/16”stud die-formed steel or Crane aluminum rocker arms
and 3/8”diameter pushrods.
36655-16
(Drawing A)
36656-16
(Drawing A)
70655-16
(Drawing A)
36655-16
(Drawing A)
36656-16
(Drawing A)
52655-16
(Drawing B)
35655-16
(Drawing B)
Replacement guideplate insert for 5/16”diameter pushrods (included in kits) 52655GB-16
Replacement guideplate insert for 3/8”diameter pushrods (included in kits) 35655GB-16
Drawing A
Drawing B
866-388-5120 • 386-236-9983 FAX 311