2011 - Crane Cams

*This product is applicable only to pre-1966 California and pre-1968 federally certified passenger cars. It
is also applicable to non-emission controlled trucks and similar vehicles. It is not applicable or intended
for use on any emission controlled vehicles operated on highways or roads.
Custom Grind Cams Also Available – Call 866-388-5120 or go to cranecams.com for ordering information
CRANE VALVE TRAIN COMPONENTS
See pg. 358
VALVE SPRING
AND RETAINER
KITS
See pg. 337
VALVE
SPRINGS
See pg. 350
RETAINERS
See pg. 362
VALVE
STEM
SEALS
See pg. 360
VALVE
STEM
LOCKS
36308-1 g 96803-16 g 99946-16 99041-1 36631-16 l 44975-1 *r 36800-16 t 36774-16 v 36750-16 y
99097-1 j 36625-16 m 44984-1 *s 36801-16 u 11746-16 w 36759-16 z
44746-16 x 36758-16 aa
See pg. 306
PUSHRODS
See pg. 328
TIMING CHAIN
AND GEAR
ASSEMBLY
See pg. 312
STEEL
ROCKER
ARMS
See pg. 315 See pg. 317
__ ALUMINUM ROCKERS __
CRANE CLASSIC/ GOLD
ENERGIZER RACE
96874-16 h 99944-16 99820-16 h 99097-1 j 95610-16 q 44975-1 *r 36800-16 t 36774-16 v 36750-16 y
99969-16 i 99094-1 k 95614-16 q 44984-1 *s 36801-16 u 11746-16 w 36759-16 z
44746-16 x 36758-16 aa
96874-16 h 99944-16 99820-16 h 99097-1 j 95610-16 q 44975-1 *r 36800-16 t 36774-16 v 36750-16 y
99969-16 i 99094-1 k 95614-16 q 44984-1 *s 36801-16 u 11746-16 w 36759-16 z
44746-16 x 36758-16 aa
96803-16g 99946-16 99041-1 36622-16 p 44975-1 *r 36800-16 t 36774-16 v 36750-16 y
99097-1 j 95618-16 q 44984-1 *s 86757-16 bb
99893-16 h 99953-16 99820-16 h 99097-1 j 36622-16 p 44975-1 *r 36800-16 t 36774-16 v 36750-16 y
99969-16 i 99094-1 k 95618-16 q 44984-1 *s 86757-16 bb
96877-16 h 99943-16 99820-16 h 99097-1 j 36622-16 p 44975-1 *r 36774-16 v 36750-16 y
99969-16 i 99094-1 k 95618-16 q 44984-1 *s 86757-16 bb
96877-16 h 99943-16 99820-16 h 99097-1 j 36622-16 p 44975-1 *r 36774-16 v 36750-16 y
99969-16 i 99094-1 k 95618-16 q 44984-1 *s 86757-16 bb
96877-16 h 99943-16 99820-16 h 99097-1 j 36622-16 p 44975-1 *r 36774-16 v 36750-16 y
99969-16 i 99094-1 k 95618-16 q 44984-1 *s 86757-16 bb
.630
.640 96877-16h 99943-16 99820-16 h 99097-1 j 36622-16 p 44975-1 *r 36774-16 v 36750-16 y
99969-16 i 99094-1 k 95618-16 q 44984-1 *s 86757-16 bb
a For 1986-89 (non-H.O.) engines originally equipped with hydraulic roller camshafts.
b Camshaft has standard base circle diameter, for use with 36532-16 or 36560-16 hydraulic roller lifters.
c Requires 36970-1 (.467” I.D.), 36971-1 (.500” I.D.), or 44970-1 (.531” I.D. SVO) steel, or 36990-1 (.467”
I.D.), 36989-1 (.500” I.D.), or 44990-1 (.531” I.D. SVO), aluminum-bronze distributor drive gear.
d Cam, lifter, valve spring, and retainer kit, includes installation lubricants.
e For use with standard Ford alignment bars.
f Vertical locking bar hydraulic roller lifters, no machining required. Cylinder head removal will be required.
g Contains standard diameter valve springs, no machining required.
h Must machine cylinder heads.
i Requires Crane Multi Fit valve locks.
j Machined steel, heat treated.
k Machined steel, heat treated, Multi Fit.
l For engines with non-adjustable pedestal rocker arms and stock base circle camshafts, heavy wall,
heat treated.
m For engines with non-adjustable pedestal mount rocker arms, heavy wall, heat treated.
n For engines with adjustable rocker arms with Crane’s Pushrod Guideplate Conversion Kit (36655-16), heavy
wall, heat treated.
o For engines with non-adjustable bottleneck studs or pedestal mount rocker arms , heavy wall, heat
treated.
p For use with or without pushrod guideplate cylinder heads, heavy wall, heat treated.
q Pro Series one-piece.
r For 73-00 engines, performance steel billet gears and roller chain set.
s For 73-00 engines, Pro Series steel billet gears and roller chain set.
t 1.6 ratio, cast, non-rail type for 3/8” studs, must machine 1966-00 cylinder heads and install 99156-
16 rocker arm studs and 36650-1 pushrod guideplates, or use 36655-16 Conversion Kit on 1977-00
pedestal mount cylinder heads for street applications.
u 1.6 ratio, cast, rail type for 3/8” studs, non-adjustable with 5/16” top bottleneck studs, adjustable
with straight 3/8” studs and locking nuts.
v Crane Classic extruded, 1.6 ratio 3/8” stud, must machine 1966-00 cylinder heads and install 99156-
16 rocker arm studs and 36650-1 pushrod guideplates, or use 36655-16 Conversion Kit on 1977-00
pedestal mount cylinder heads for street applications.
w Energizer, 1.6 ratio 3/8” stud, must machine 1966-00 cylinder heads and install 99156-16 rocker
arm studs and 36650-1 pushrod guideplates, or use 36655-16 Conversion Kit on 1977-00 pedestal
mount cylinder heads for street applications.
x Energizer, 1.7 ratio, non-adjustable, for pedestal mount cylinder heads, no machining required,
includes Rocker Arm Pedestal Shim Kit.
y 1.6 ratio 3/8” stud, must machine 1966-00 cylinder heads and install 99156-16 rocker arm studs and
36650-1 pushrod guideplates, or use 36655-16 Conversion Kit on 1977-00 pedestal mount cylinder
heads for street applications.
z 1.6 ratio, non-adjustable, for pedestal mount cylinder heads, no machining required, includes Rocker
Arm Pedestal Shim Kit.
aa 1.7 ratio, non-adjustable, for pedestal mount cylinder heads, no machining required, includes Rocker
Arm Pedestal Shim Kit.
bb 1.6 ratio, 7/16” stud, must machine 1966-00 cylinder heads and install 99157-16 rocker arm studs
and 36650-1 pushrod guideplates.
866-388-5120 • 386-236-9983 FAX 201