2011 - Crane Cams

*This product is applicable only to pre-1966 California and pre-1968 federally certified passenger cars. It
is also applicable to non-emission controlled trucks and similar vehicles. It is not applicable or intended
for use on any emission controlled vehicles operated on highways or roads.
Custom Grind Cams Also Available – Call 866-388-5120 or go to cranecams.com for ordering information
CRANE VALVE TRAIN COMPONENTS
See pg. 358
VALVE SPRING
AND RETAINER
KITS
See pg. 337
VALVE
SPRINGS
See pg. 350
RETAINERS
See pg. 362
VALVE
STEM
SEALS
See pg. 360
VALVE
STEM
LOCKS
See pg. 306
PUSHRODS
See pg. 328
TIMING CHAIN
AND GEAR
ASSEMBLY
See pg. 312
STEEL
ROCKER
ARMS
See pg. 315 See pg. 317
__ ALUMINUM ROCKERS __
CRANE CLASSIC/ GOLD
ENERGIZER RACE
99893-16 99953-16 99820-16 e 99097-1 f 36622-16 g 44975-1 *i 36774-16 k 36750-16 l
95618-16 h 44984-1 *j 86757-16 m
99893-16 99953-16 99820-16 e 99097-1 f 36622-16 g 44975-1 *i 36774-16 k 36750-16 l
95618-16 h 44984-1 *j 86757-16 m
99885-16 e 99956-16 99820-16 e 99097-1 f 36622-16 g 44975-1 *i 36774-16 k 36750-16 l
95618-16 h 44984-1 *j 86757-16 m
99885-16 e 99956-16 99820-16 e 99097-1 f 36622-16 g 44975-1 *i 36774-16 k 36750-16 l
95618-16 h 44984-1 *j 86757-16 m
99885-16 e 99956-16 99820-16 e 99097-1 f 36622-16 g 44975-1 *i 36774-16 k 36750-16 l
95618-16 h 44984-1 *j 86757-16 m
99885-16 e 99956-16 99820-16 e 99097-1 f 36622-16 g 44975-1 *i 36774-16 k 36750-16 l
95618-16 h 44984-1 *j 86757-16 m
a Requires 36970-1 (.467” I.D.), 36971-1 (.500” I.D.), or 44970-1 (.531” I.D. SVO) steel, or 36990-1
(.467” I.D.), 36989-1 (.500” I.D.), or 44990-1 (.531” I.D. SVO), aluminum-bronze distributor drive
gear.
b Requires 7/16-20 x 1-1/4” grade 8 cam gear bolt and hardened washer.
c Camshaft has 351W firing order: 1-3-7-2-6-5-4-8
d Ultra Pro Series roller lifters.
e Must machine cylinder heads.
f Machined steel, heat treated.
g For use with or without pushrod guideplate cylinder heads, heavy wall, heat treated.
h Pro Series one-piece.
i For 73-00 engines, performance steel billet gears and roller chain set.
j For 73-00 engines, Pro Series steel billet gears and roller chain set.
k Crane Classic extruded, 1.6 ratio 3/8” stud, must machine 1966-00 cylinder heads and install
99156-16 rocker arm studs and 36650-1 pushrod guideplates, or use 36655-16 Conversion Kit
on 1977-00 pedestal mount cylinder heads for street applications.
l 1.6 ratio, 3/8” stud, must machine 1966-00 cylinder heads and install 99156-16 rocker arm studs
and 36650-1 pushrod guideplates, or use 36655-16 Conversion Kit on 1977-00 pedestal mount
cylinder heads for street applications.
m 1.6 ratio, 7/16” stud, must machine 1966-00 cylinder heads and install 99157-16 rocker arm studs
and 36650-1 pushrod guideplates.
866-388-5120 • 386-236-9983 FAX 203