2011 - Crane Cams

*This product is applicable only to pre-1966 California and pre-1968 federally certified passenger cars. It
is also applicable to non-emission controlled trucks and similar vehicles. It is not applicable or intended
for use on any emission controlled vehicles operated on highways or roads.
Custom Grind Cams Also Available – Call 866-388-5120 or go to cranecams.com for ordering information
CRANE VALVE TRAIN COMPONENTS
See pg. 358
VALVE SPRING
AND RETAINER
KITS
See pg. 337
VALVE
SPRINGS
See pg. 350
RETAINERS
See pg. 362
VALVE
STEM
SEALS
See pg. 360
VALVE
STEM
LOCKS
64308-1 c 99839-16 c 99957-16 99042-1 e 95637-16 g 86977-1 *h 36774-16 i,j 36750-16 l,j
99098-1 f 11746-16 k,j 86757-16 m,j
See pg. 306
PUSHRODS
See pg. 328
TIMING CHAIN
AND GEAR
ASSEMBLY
See pg. 312
STEEL
ROCKER
ARMS
See pg. 315 See pg. 317
__ ALUMINUM ROCKERS __
CRANE CLASSIC/ GOLD
ENERGIZER RACE
64308-1 c 99839-16 c 99957-16 99042-1 e 95637-16 g 86977-1 *h 36774-16 i,j 36750-16 l,j
99098-1 f 11746-16 k,j 86757-16 m,j
64308-1 c 99839-16 c 99957-16 99042-1 e 95637-16 g 86977-1 *h 36774-16 i,j 36750-16 l,j
99098-1 f 11746-16 k,j 86757-16 m,j
64308-1 c 99839-16 c 99957-16 99042-1 e 95637-16 g 86977-1 *h 36774-16 i,j 36750-16 l,j
99098-1 f 11746-16 k,j 86757-16 m,j
64308-1 c 99839-16 c 99957-16 99042-1 e 95637-16 g 86977-1 *h 36774-16 i,j 36750-16 l,j
99098-1 f 11746-16 k,j 86757-16 m,j
99838-16 d 99948-16 99042-1 e 95637-16 g 86977-1 *h 36774-16 i,j 36750-16 l,j
99098-1 f 11746-16 k,j 86757-16 m,j
99838-16 d 99948-16 99822-16 d 99098-1 f 95637-16 g 86977-1 *h 36774-16 i,j 36750-16 l,j
11746-16 k,j 86757-16 m,j
99838-16 d 99948-16 99822-16 d 99098-1 f 95637-16 g 86977-1 *h 36774-16 i,j 36750-16 l,j
11746-16 k,j 86757-16 m,j
99893-16 d 99954-16 99822-16 d 99098-1 f 95637-16 g 86977-1 *h 36774-16 i,j 36750-16 l,j
11746-16 k,j 86757-16 m,j
a Cam and lifter kit, includes installation lubricants and Rocker Arm Bridge Shim Kit.
b Optional Hi Intensity hydraulic lifters, see page 292 for details.
c Contains standard diameter valve springs, no machining required.
d Must machine cylinder heads.
e For engines with single groove valve stems.
f Machined steel, heat treated, for engines with single groove valve stems.
g Pro Series one-piece, for 1970-1991 304 thru 401 engines.
h Pro Series steel billet gears and roller chain with thrust bearing.
i Crane Classic extruded, 1.6 ratio, 3/8”stud.
j Must machine 74-91 cylinder heads and install 99156-16 3/8”rocker arm studs (or 99157-16 7/16
rocker arm studs for 86757-16 rockers) and aftermarket pushrod guideplates. Special order heattreated
pushrods are required for use with guideplates. See page 305 for special pushrod ordering
instructions.
k Energizer, 1.6 ratio, 3/8”stud.
l 1.6 ratio, 3/8”stud.
m 1.6 ratio, 7/16”stud.
866-388-5120 • 386-236-9983 FAX 43