2011 - Crane Cams

Custom Grind Cams Also Available – Call 866-388-5120 or go to cranecams.com for ordering information
CRANE VALVE TRAIN COMPONENTS
See pg. 358
VALVE SPRING
AND RETAINER
KITS
See pg. 337
VALVE
SPRINGS
See pg. 350
RETAINERS
See pg. 362
VALVE
STEM
SEALS
64308-1 d 99839-16 e 99957-16 64640-16 g 68975-1 i 64770-16 k 64790-1 m
64641-16 h 68977-1 j 64771-16 *l 64791-1 *n
64308-1 d 99839-16 e 99957-16 64640-16 g 68975-1 i 64770-16 k 64790-1 m
64641-16 h 68977-1 j 64771-16 *l 64791-1 *n
64308-1 d 99839-16 e 99957-16 64640-16 g 68975-1 i 64770-16 k 64790-1 m
64641-16 h 68977-1 j 64771-16 *l 64791-1 *n
64308-1 d 99839-16 e 99957-16 64640-16 g 68975-1 i 64770-16 k 64790-1 m
64641-16 h 68977-1 j 64771-16 *l 64791-1 *n
64308-1 d 99839-16 e 99957-16 64640-16 g 68975-1 i 64770-16 k 64790-1 m
64641-16 h 68977-1 j 64771-16 *l 64791-1 *n
64308-1 d 99839-16 e 99957-16 64640-16 g 68975-1 i 64770-16 k 64790-1 m
64641-16 h 68977-1 j 64771-16 *l 64791-1 *n
99839-16 e 99954-16 99822-16 b 64640-16 g 68975-1 i 64770-16 k 64790-1 m
64641-16 h 68977-1 j 64771-16 *l 64791-1 *n
99839-16 e 99954-16 99822-16 b 64640-16 g 68975-1 i 64770-16 k 64790-1 m
64641-16 h 68977-1 j 64771-16 *l 64791-1 *n
a Cam and Lifter Kit, includes installation lubricants.
b For 68-78 engines.
c For 68-78 engines, optional Hi Intensity hydraulic lifters, see page 292 for details.
d Contains standard diameter valve springs, no machining required.
e Standard diameter valve springs, no machining required.
f Must machine cylinder heads.
g Heavy wall, heat treated, for Low Block engines with adjustable rocker arms.
h Heavy wall, heat treated, for High Block engines with adjustable rocker arms.
i Performance steel billet gears and roller chain set.
See pg. 360
VALVE
STEM
LOCKS
See pg. 306
PUSHRODS
See pg. 328
TIMING CHAIN
AND GEAR
ASSEMBLY
See pg. 312
CAST
ROCKER
ARMS
Section Continued
See pg. 315 See pg. 320
__ ALUMINUM ROCKERS __
CRANE CLASSIC/ GOLD
ENERGIZER RACE
j Pro Series steel billet gears and roller chain set with thrust bearing.
k 1.5 ratio iron rocker arms, adjustable, must use appropriate Crane pushrods (shafts not included).
l 1.6 ratio iron rocker arms, adjustable, must use appropriate Crane pushrods (shafts not included).
m 1.5 ratio aluminum rocker arm kit with rocker shafts, adjustable, must use appropriate Crane
pushrods.
n 1.6 ratio aluminum rocker arm kit with rocker shafts, adjustable, must use appropriate Crane
pushrods.
866-388-5120 • 386-236-9983 FAX 171