2011 - Crane Cams

*This product is applicable only to pre-1966 California and pre-1968 federally certified passenger cars. It
is also applicable to non-emission controlled trucks and similar vehicles. It is not applicable or intended
for use on any emission controlled vehicles operated on highways or roads.
Custom Grind Cams Also Available – Call 866-388-5120 or go to cranecams.com for ordering information
CRANE VALVE TRAIN COMPONENTS
See pg. 358
VALVE SPRING
AND RETAINER
KITS
See pg. 337
VALVE
SPRINGS
See pg. 350
RETAINERS
See pg. 362
VALVE
STEM
SEALS
See pg. 360
VALVE
STEM
LOCKS
See pg. 306
PUSHRODS
See pg. 328
TIMING CHAIN
AND GEAR
ASSEMBLY
See pg. 312
STEEL
ROCKER
ARMS
See pg. 315 See pg. 317
__ ALUMINUM ROCKERS __
CRANE CLASSIC/ GOLD
ENERGIZER RACE
96870-16 d 99943-16 99820-16 d 99097-1 f 36631-16 h 44975-1 *k 44774-16 m 36759-16 p
99969-16 e 99087-1 g 36625-16 i 44984-1 *l 36774-16 n 36758-16 q
95608-16 i,j 44746-16 o 36750-16 r
96870-16 d 99943-16 99820-16 d 99097-1 f 36631-16 h 44975-1 *k 44774-16 m 36759-16 p
99969-16 e 99087-1 g 36625-16 i 44984-1 *l 36774-16 n 36758-16 q
95608-16 i,j 44746-16 o 36750-16 r
96870-16 d 99943-16 99820-16 d 99097-1 f 36631-16 h 44975-1 *k 44774-16 m 36759-16 p
99969-16 e 99087-1 g 36625-16 i 44984-1 *l 36774-16 n 36758-16 q
95608-16 i,j 44746-16 o 36750-16 r
96870-16 d 99943-16 99820-16 d 99097-1 f 36631-16 h 44975-1 *k 44774-16 m 36759-16 p
99969-16 e 99087-1 g 36625-16 i 44984-1 *l 36774-16 n 36758-16 q
95608-16 i,j 44746-16 o 36750-16 r
96870-16 d 99943-16 99820-16 d 99097-1 f 36631-16 h 44975-1 *k 44774-16 m 36759-16 p
99969-16 e 99087-1 g 36625-16 i 44984-1 *l 36774-16 n 36758-16 q
95608-16 i,j 44746-16 o 36750-16 r
a For use with standard Ford alignment bars.
b Vertical locking bar hydraulic roller lifters, no machining required. Cylinder head removal required
for installation in 302 and 302 H.O. applications.
c Gross valve lift with 1.7 ratio rocker arms.
d Must machine cylinder heads.
e Requires Crane Multi Fit valve stem locks.
f Machined steel, heat treated.
g Machined steel, heat treated, Multi Fit.
h For engines with non-adjustable pedestal mount rocker arms, heavy wall, heat treated.
i For 302 H.O. engines with adjustable rocker arms with Pushrod Guideplate Conversion Kit
(36655-16), heavy wall, heat treated. See page 325 for details.
j Pro Series one-piece.
k Performance steel billet gears and roller chain set.
l Pro Series steel billet gears and roller chain set.
m Crane Classic extruded, 1.6 ratio, non-adjustable, for pedestal mount cylinder heads, no machining
required.
Section Continued
n Crane Classic extruded, 1.6 ratio, 3/8” stud, must machine cylinder heads and install 99156-16
rocker arm studs and 36650-1 pushrod guideplates, or use 36655-16 Conversion Kit on pedestal
mount cylinder heads for street applications.
o Energizer 1.7 ratio, non-adjustable, for pedestal mount cylinder heads, no machining required,
includes Rocker Arm Pedestal Shim Kit.
p 1.6 ratio, non-adjustable, for pedestal mount cylinder heads, no machining required, includes
Rocker Arm Pedestal Shim Kit.
q 1.7 ratio, non-adjustable, for pedestal mount cylinder heads, no machining required, includes
Rocker Arm Pedestal Shim Kit.
r 1.6 ratio, 3/8” stud, must machine cylinder heads and install 99156-16 rocker arm studs and
36650-1 pushrod guideplates, or use 36655-16 Conversion Kit on pedestal mount cylinder heads
for street applications.
866-388-5120 • 386-236-9983 FAX 209