2011 - Crane Cams

*This product is applicable only to pre-1966 California and pre-1968 federally certified passenger cars. It
is also applicable to non-emission controlled trucks and similar vehicles. It is not applicable or intended
for use on any emission controlled vehicles operated on highways or roads.
Custom Grind Cams Also Available – Call 866-388-5120 or go to cranecams.com for ordering information
CRANE VALVE TRAIN COMPONENTS
See pg. 358
VALVE SPRING
AND RETAINER
KITS
See pg. 337
VALVE
SPRINGS
See pg. 350
RETAINERS
See pg. 362
VALVE
STEM
SEALS
See pg. 360
VALVE
STEM
LOCKS
See pg. 306
PUSHRODS
See pg. 328
TIMING CHAIN
AND GEAR
ASSEMBLY
See pg. 312
CAST
ROCKER
ARMS
See pg. 315 See pg. 320
__ ALUMINUM ROCKERS __
CRANE CLASSIC/ GOLD
ENERGIZER RACE
96879-16 c 99970-16 99822-16 c 99098-1 j 64621-16 m 68975-1 *o 64770-16 q 64790-1 s
99832-16 c,d 99976-16 f 64622-16 n 68977-1 *p 64771-16 *r 64791-1 *t
96879-16 c 99970-16 99822-16 c 99098-1 j 64621-16 m 68975-1 *o 64770-16 q 64790-1 s
99832-16 p,c 99976-16 q 64622-16 n 68977-1 *p 64771-16 *r 64791-1 *t
99885-16 c 99955-16 99822-16 c 99098-1 j 64621-16 m 68975-1 *o 64770-16 q 64790-1 s
64622-16 n 68977-1 *p 64771-16 *r 64791-1 *t
99885-16 c 99955-16 99822-16 c 99098-1 j 64621-16 m 68975-1 *o 64770-16 q 64790-1 s
64622-16 n 68977-1 *p 64771-16 *r 64791-1 *t
99885-16 c 99955-16 99822-16 c 99098-1 j 64621-16 m 68975-1 *o 64770-16 q 64790-1 s
64622-16 n 68977-1 *p 64771-16 *r 64791-1 *t
99885-16 c 99955-16 99822-16 c 99098-1 j 64621-16 m 68975-1 *o 64770-16 q 64790-1 s
64622-16 n 68977-1 *p 64771-16 *r 64791-1 *t
99885-16 c 99955-16 99822-16 c 99098-1 j 64621-16 m 68975-1 *o 64770-16 q 64790-1 s
64622-16 n 68977-1 *p 64771-16 *r 64791-1 *t
99885-16 c 99955-16 99822-16 c 99098-1 j 64621-16 m 68975-1 *o 64770-16 q 64790-1 s
99681-16 g 64622-16 n 68977-1 *p 64771-16 *r 64791-1 *t
99885-16 c 99955-16 99822-16 c 99098-1 j 64621-16 m 68975-1 *o 64770-16 q 64790-1 s
99681-16 g 64622-16 n 68977-1 *p 64771-16 *r 64791-1 *t
99885-16 c 99955-16 99822-16 c 99098-1 j 64621-16 m 68975-1 *o 64770-16 q 64790-1 s
99681-16 g 64622-16 n 68977-1 *p 64771-16 *r 64791-1 *t
99885-16 c 99955-16 99822-16 c 99098-1 j 64621-16 m 68975-1 *o 64770-16 q 64790-1 s
99681-16 g 64622-16 n 68977-1 *p 64771-16 *r 64791-1 *t
96886-16 c 99634-16 h 99828-16 c 99081-1 k 64621-16 m 68975-1 *o 64770-16 q 64790-1 s
961246-16 c,e 99962-16 i 99082-1 l 64622-16 n 68977-1 *p 64771-16 *r 64791-1 *t
a Requires cam button spacer and 66990-1 aluminum-bronze distributor drive gear.
b Ultra Pro Series roller lifters.
c Must machine cylinder heads.
d Ovate wire beehive spring, requires 99976-16 retainers.
e Triple, for 2.050”assembly height, requires 99662-16 retainers.
f Steel, for 99832-16 beehive springs.
g Titanium, Posi Stop, must use 99098-1 single groove valve stem locks, included with the retainers.
h Titanium, standard 10 degree configuration.
i Titanium, for 961246-16 valve springs.
j Machined steel Heat treated, single groove.
k Machined steel, heat treated, 10 degree for 11/32”single groove valve stems.
l Machined steel, heat treated, 10 degree for 3/8”single groove valve stems.
m Heavy wall, heat treated, for Low-Block engines with adjustable rocker arms.
n Heavy wall, heat treated, for High-Block engines with adjustable rocker arms.
o Performance steel billet gears and roller chain set.
p Pro Series steel billet gears and roller chain set with thrust bearing.
q 1.5 ratio iron rocker arms, adjustable, must use appropriate Crane pushrods (shafts not included).
r 1.6 ratio iron rocker arms, adjustable, must use appropriate Crane pushrods (shafts not included).
s 1.5 ratio aluminum rocker arm kit with rocker shafts, adjustable, must use appropriate Crane pushrods.
t 1.6 ratio aluminum rocker arm kit with rocker shafts, adjustable, must use appropriate Crane pushrods.
866-388-5120 • 386-236-9983 FAX 179