2011 - Crane Cams

*This product is applicable only to pre-1966 California and pre-1968 federally certified passenger cars. It
is also applicable to non-emission controlled trucks and similar vehicles. It is not applicable or intended
for use on any emission controlled vehicles operated on highways or roads.
Custom Grind Cams Also Available – Call 866-388-5120 or go to cranecams.com for ordering information
CRANE VALVE TRAIN COMPONENTS
See pg. 358
VALVE SPRING
AND RETAINER
KITS
See pg. 337
VALVE
SPRINGS
See pg. 350
RETAINERS
903-2003 b 158830-16 c 158660-16 d
903-2003 b 158830-16 c 158660-16 d
903-2003 b 158830-16 c 158660-16 d
903-2003 b 158830-16 c 158660-16 d
903-2003 b 158830-16 c 158660-16 d
903-2003 b 158830-16 c 158660-16 d
a Requires Ferrea lash caps, part no. C10008.
b Includes valve springs and titanium retainers.
See pg. 362
VALVE
STEM
SEALS
See pg. 360
VALVE
STEM
LOCKS
See pg. 306
PUSHRODS
See pg. 328
TIMING BELT
AND SPROCKET
ASSEMBLY
c Requires 158660-16 retainers.
d Titanium, for use with standard valve locks.
See pg. 312
STEEL
ROCKER
ARMS
See pg. 315 See pg. 317
__ ALUMINUM ROCKERS __
CRANE CLASSIC/ GOLD
ENERGIZER RACE
Custom grinds available using the following lobes:
Intake CHR-226/355 CHR-232/400* CHR-236/440*
Exhaust CHR-226/345 CHR-230/400*
* Requires Ferrea lash caps, part no. C10008
866-388-5120 • 386-236-9983 FAX 149