2011 - Crane Cams

More documents

Recommendations

Info

CAMSHAFTS Chrysler-Dodge-Plymouth “LA” V-8 64-87 160 Application Mechanical Lifter Camshafts Good low end and mid range torque and HP, fair idle, moderate performance usage, bracket racing, 3400- 3800 cruise RPM, 10.0 to 11.5 compression ratio advised. Good mid range torque, performance usage, limited oval track 1/4-3/8 mile, bracket racing w/heavy car, serious off road, auto trans w/2500+ converter, 10.5 to 12.0 compression ratio advised. Good mid range torque and HP, rough idle, performance usage, limited oval track, bracket racing, serious off road, auto trans w/2000+ converter, 10.5 to 12.0 compression ratio advised. Performance usage, great mid range torque and HP, bracket racing, 340+ cu.in., auto trans w/2500+ converter, 11.0 to 12.5 compression ratio advised. Good mid range and upper RPM torque and HP, rough idle, performance usage, bracket racing, 340+ cu.in., auto trans w/2500+ converter, 11.0 to 12.5 compression ratio advised. Good upper RPM torque and HP, moderate competition only, bracket racing, 360+ cu.in., auto trans w/3000+ converter, good w/ plate nitrous system, aluminum cylinder heads recommended, 12.0 minimum compression ratio advised. Good upper RPM torque and HP,moderate competition only, bracket racing, 360+ cu.in., auto trans w/3000+ converter, 12.0 minimum compression ratio advised. Competition only, good upper RPM torque and HP, auto trans w/3500+ converter, good with manifold nitrous system, 360+ cu.in., 12.5 minimum compression ratio advised. Competition only, good upper RPM HP, auto trans w/3500+ converter, 360+ cu.in., 12.5 minimum compression ratio advised. Radical competition only, maximum performance applications, flat tappet restricted classes, aluminum cylinder heads advised, 13.5 minimum compression ratio advised. RPM range shown is for average usage. These cam profiles will RPM higher, depending upon application. NOTE: To effect valve adjustment, 318, 340 and 360 engines require the use of Crane Adjustable Rocker Arms and appropriate pushrods when using mechanical lifter cams. Camshaft Series/ Grind Number RPM POWER RANGE F-238/3200-2-14 2600- 6400 F-244/3454-2S-6 3200- 6800 F-248/3602-2-8 3200- 7000 F-256/383-2S-8 3600- 7400 F-258/3735-2-8 3600- 7200 F-262/394-2S-10 3800- 7600 F-268/3868-2-8 4000- 7600 F-274/412-2S-8 4200- 8000 F-278/4002-8 4400- 8000 F-288/4134-8 5000- 8400 Camshaft PART NUMBER/ Emissions Code See pg. 293 LIFTERS CRANECAMS.COM 273-340-360 (5.9L) and 67-86 318 (5.2L) cu.in COMPLETE CAM SPECIFICATIONS Degrees Duration @ .050” Int/Exh. Advertised Degrees Duration Int/Exh. Degrees Lobe Separation Open/Close @ .050” Cam Lift Int/Exh Lash Hot Int. Exh. Gross Lift Int. Exh. 691191 * 99260-16 238 300 114 10 48 .022 .480 248 310 63 5 .022 .500 3 690921 * 99260-16 244 280 106 19 45 .026 .518 252 288 55 17 .026 .536 3 690911 * 99260-16 248 284 108 21 47 .026 .540 258 294 62 16 .026 .560 3 690931 * 99260-16 256 312 108 25 51 .014 .575 260 316 63 17 .016 .585 3 691381 * 99260-16 258 294 108 26 52 .026 .560 268 304 67 21 .026 .580 3 691391 * 99260-16 262 294 110 26 56 .018 .591 264 296 67 17 .018 .596 3 691561 * 99260-16 268 304 108 31 57 .026 .580 278 314 72 26 .026 .600 3 691571 * 99260-16 274 306 108 34 60 .018 .618 288 324 75 33 .026 .620 3 691701 * 99260-16 278 314 108 36 62 .026 .600 278 314 72 26 .026 .600 3 691951 * 99260-16 288 324 108 41 67 .026 .620 288 324 77 31 .026 .620 3 NOTE: Early 1986-91 318 (5.2L) and early 1987-91 360 (5.9L) engines are equipped with hydraulic roller camshafts and lifters. Conventional hydraulic, mechanical, or roller camshafts and lifters can be installed in these engines, providing the appropriate kit components are used.
*This product is applicable only to pre-1966 California and pre-1968 federally certified passenger cars. It is also applicable to non-emission controlled trucks and similar vehicles. It is not applicable or intended for use on any emission controlled vehicles operated on highways or roads. Custom Grind Cams Also Available – Call 866-388-5120 or go to cranecams.com for ordering information CRANE VALVE TRAIN COMPONENTS See pg. 358 VALVE SPRING AND RETAINER KITS See pg. 337 VALVE SPRINGS See pg. 350 RETAINERS See pg. 362 VALVE STEM SEALS See pg. 360 VALVE STEM LOCKS See pg. 306 PUSHRODS See pg. 328 TIMING CHAIN AND GEAR ASSEMBLY See pg. 312 CAST ROCKER ARMS See pg. 315 See pg. 320 __ ALUMINUM ROCKERS __ CRANE CLASSIC/ GOLD ENERGIZER RACE 99838-16 a 99948-16 99822-16 a 69622-16 b 69975-1 *c 69770-16 d 69790-1 f 69771-16 *e 69791-1 *g 99838-16 a 99948-16 99822-16 a 69622-16 b 69975-1 *c 69770-16 d 69790-1 f 69771-16 *e 69791-1 *g 99838-16 a 99948-16 99822-16 a 69622-16 b 69975-1 *c 69770-16 d 69790-1 f 69771-16 *e 69791-1 *g 99838-16 a 99948-16 99822-16 a 69622-16 b 69975-1 *c 69770-16 d 69790-1 f 69771-16 *e 69791-1 *g 99838-16 a 99948-16 99822-16 a 69622-16 b 69975-1 *c 69770-16 d 69790-1 f 69771-16 *e 69791-1 *g 99838-16 a 99948-16 99822-16 a 69622-16 b 69975-1 *c 69770-16 d 69790-1 f 69771-16 *e 69791-1 *g 99838-16 a 99948-16 99822-16 a 69622-16 b 69975-1 *c 69770-16 d 69790-1 f 69771-16 *e 69791-1 *g 99838-16 a 99948-16 99822-16 a 69622-16 b 69975-1 *c 69770-16 d 69790-1 f 69771-16 *e 69791-1 *g 99838-16 a 99948-16 99822-16 a 69622-16 b 69975-1 *c 69770-16 d 69790-1 f 69771-16 *e 69791-1 *g 99838-16 a 99948-16 99822-16 a 69622-16 b 69975-1 *c 69770-16 d 69790-1 f 69771-16 *e 69791-1 *g a Must machine cylinder heads. b Heavy wall, heat treated, for use with adjustable rocker arms. c Performance steel billet gears and roller chain set. d 1.5 ratio iron rocker arms, adjustable, must use appropriate Crane pushrods (shafts not included). e 1.6 ratio iron rocker arms, adjustable, must use appropriate Crane pushrods (shafts not included). f 1.5 ratio aluminum rocker arm kit with rocker shafts, adjustable, must use appropriate Crane pushrods. g 1.6 ratio aluminum rocker arm kit with rocker shafts, adjustable, must use appropriate Crane pushrods. 866-388-5120 • 386-236-9983 FAX 161
Page 1 and 2:
MASTER CATALOG CAMSHAF TS • VALVE
Page 3 and 4:
How to Use This Catalog About the C
Page 5 and 6:
Table of Contents Timing Chains and
Page 7 and 8:
Crane Cams History Crane Cams Histo
Page 9 and 10:
Camshaft Table of Contents Chrysler
Page 11 and 12:
Crane Camshaft Series Crane Camshaf
Page 13 and 14:
Crane Cams & Valve Train Products S
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Duration@ .050” Advertised Durati
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
*This product is applicable only to
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
1992-1996 305 (5.0L)- 350 (5.7L) LT
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110: Other sizes are available on reques
Page 111 and 112: *This product is applicable only to
Page 153 and 154: 1986-1991 318 (5.2L) & 1987-1991 36
Page 159: *This product is applicable only to
Page 169 and 170: Street roller camshafts are also of
Page 171 and 172: Custom Grind Cams Also Available -
Page 195 and 196: 1969-1993 351 (5.8L) cu.in. Windsor
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
nuts can be installed to permit ind
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Oldsmobile DRCE V8 The DRCE (Drag R
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Cam and Valve Train Buyer’s Guide
Page 287 and 288:
Camshaft Components Cam Degreeing B
Page 289 and 290:
Distributor-Magneto Drive Gears Cop
Page 291 and 292:
Distributor-Magneto Drive Gears Coa
Page 293 and 294:
Lifters - Hydraulic and Mechanical
Page 295 and 296:
Lifters - Hydraulic Roller Hydrauli
Page 297 and 298:
Lifters - Mechanical Roller Mechani
Page 299 and 300:
Lifters - Mechanical Roller Pushrod
Page 301 and 302:
Lifters - Mechanical Roller Applica
Page 303 and 304:
Lifters - Mechanical Roller Applica
Page 305 and 306:
Lubricants Assembly Lube (Paste) Cr
Page 307 and 308:
Pushrods Overall Ends Application C
Page 309 and 310:
Pushrods - One Piece Pro Series, On
Page 311 and 312:
Pushrod Accessories Pushrod Guidepl
Page 313 and 314:
Rocker Arms, Steel & Ductile Iron A
Page 315 and 316:
Aluminum Rocker Arms, Energizer Ene
Page 317 and 318:
Aluminum Roller Rockers, Gold Race
Page 319 and 320:
Aluminum Roller Rockers, Gold Race
Page 321 and 322:
Aluminum Shaft Mount Rocker Arms Ne
Page 323 and 324:
Rocker Arm Adjusting Nuts, Screws R
Page 325 and 326:
Rocker Arm Guideplate Conversion Ki
Page 327 and 328:
Rocker Arm Studs Rocker Arm Studs C
Page 329 and 330:
Timing Chains and Components Pro-Se
Page 331 and 332:
Tools Pushrods, Adjustable Checking
Page 333 and 334:
Vacuum Kits and Accessories Adjusta
Page 335 and 336:
Valve Train Questions Valve Spring
Page 337 and 338:
Valve Springs O.D I.D. Damper Seat
Page 339 and 340:
Valve Springs O.D I.D.1 I.D.2 Dampe
Page 341 and 342:
Valve Springs Valve Spring Spec Cha
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Valve Spring Retainers How to Use t
Page 351 and 352:
Valve Spring Retainer Dimensions -
Page 353 and 354:
Valve Spring Retainer Height Chart
Page 355 and 356:
Valve Spring to Retainer Cross Refe
Page 357 and 358:
Valve Spring to Retainer Cross Refe
Page 359 and 360:
Valve Spring and Retainer Kits Valv
Page 361 and 362:
Valve Stem Locks Multi-Fit Valve St
Page 363 and 364:
Valve Train Stabilizers Durable ste
Page 365 and 366:
How to Identify Your Crane Cam SERI
Page 367 and 368:
Street/Strip, Off Road, Marine Cams
Page 369 and 370:
Finish Grind Crane Round Lobe Outri
Page 371 and 372:
Other Engine Applications Ford, Lin
Page 373 and 374:
Flat Tappet Camshaft Break-in Proce
Page 375 and 376:
Adjusting the Valve Train Hydraulic
Page 377 and 378:
Commonly Asked Valve Spring Questio
Page 379 and 380:
Cam and Valve Train Questions Commo
Page 381 and 382:
Degreeing the Cam Degreeing the Cam
Page 383 and 384:
Degreeing the Cam Degreeing the Cam
Page 385 and 386:
Understanding the Cam Specification
Page 387 and 388:
Ignition Table of Contents HI-6S Mu
Page 389 and 390:
Street Performance, Trucks, Trailer
Page 391 and 392:
Street, Street Performance, Race HI
Page 393 and 394:
Street Performance, Race HI-6R/Digi
Page 395 and 396:
Street Performance, Race, Turbo HI-
Page 397 and 398:
Street Performance, Race, Turbo HI-
Page 399 and 400:
Oval Track, Race HI-6N CD Ignition
Page 401 and 402:
Timing Retard Timing Retard Control
Page 403 and 404:
Points Conversion Ignition XR-i Poi
Page 405 and 406:
Points Conversion Ignition XR700 Re
Page 407 and 408:
Points Conversion Ignition XR3000 R
Page 409 and 410:
Distributors Race Billet Distributo
Page 411 and 412:
Distributors Oval Track Pro Race Di
Page 413 and 414:
Performance Ignition Coils LX91, LX
Page 415 and 416:
Performance Ignition Coils PS91, PS
Page 417 and 418:
Performance Plug Wires 8.5mm Fire W
Page 419 and 420:
FireWire Spark Plug Wire Now Availa
Page 421 and 422:
Part Number Index Part No. Page No.
Page 423 and 424:
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
Page 433 and 434:
show all

2011 - Crane Cams

Create successful ePaper yourself

Delete template?

Save as template?