2011 - Crane Cams

Lifters - Mechanical Roller
Pushrod Seat Heights
Application
Crane DOES NOT recommend the use of oil restrictors.
American Motors V-8 66-91, 290-304-343-360 (5.9L)-390-401 cu.in.
Vertical locking bar with .200”short pushrod seat location .904" .815" 1.325" 66550-16
Verticallockingbarfor.937”diameterlifterbores,with.200”shortpushrodseatlocation .936" .850" 66564-16
Verticallockingbarfor.937”diameterlifterbores,with.080”shortpushrodseatlocation .936" .850" 66565-16
Arias/Fontana/MBR V-8, 8.3L
Vertical locking bar .904" .815" 1.325" 95542-16
Vertical locking bar with .120”tall pushrod seat location .904" .815" 1.455" 95543-16
Vertical locking bar will accommodate pushrod oiling .904" .815" 1.325" 95550-16
Vertical locking bar for .937”diameter lifter bores, will accommodate pushrod oiling .936" .850" 66564-16
Vertical locking bar for .937”diameter lifter bores, with .120”tall pushrod seat location, will
accommodate pushrod oiling .936" .850" 66565-16
Brad Anderson 426, Rodeck TFX-92, Keith Black Aluminum 426 V-8, JP-1
Vertical locking bar .904" .815" 1.325" 66542-16
Vertical locking bar with .120”tall pushrod seat location .904" .815" 1.455" 66543-16
Vertical locking bar for spread lifter bore blocks .904" .815" 1.325" 95542-16
Vertical locking bar for spread lifter bore blocks, with .120”tall pushrod seat location .904" .815" 1.455" 95543-16
Verticallockingbarforspreadlifterborecylinderblocks,willaccommodatepushrodoiling .904" .815" 1.325" 95550-16
Vertical locking bar for .937”diameter lifter bores, with standard to .200”spread lifter bore spacing,
will accommodate pushrod oiling .936" .850" 66564-16
Vertical locking bar for .937”diameter lifter bores, with standard to .200”spread lifter bore spacing,
with .120”tall pushrod seat location, will accommodate pushrod oiling .936" .850" 66565-16
Verticallockingbarfor1.000”diameterlifterbores,withstandardto.200”spreadlifterborespacing .998" .920" 1.320" 66547-16
Vertical locking bar for 1.000" diameter lifter bores, with standard to .200" spread lifter bore spacing,
with .200" tall pushrod seat location, will accommodate pushrod oiling. .998" .920" 1.515" 66555-16
Vertical locking bar for 1.062”diameter lifter bores, with standard to .200”spread lifter bore spacing,
with .200”tall pushrod seat location. 1.060" .920" 1.520" 66549-16
Buick/Dart Race Head V-8, 302-350 cu. in.
Vertical locking bar for .842”diameter lifter bores, with .180”offset left intake and exhaust pushrod seats .842" .750" 1.575" X1057L-2
Vertical locking bar for .875”diameter lifter bores, with .180”offset left intake and exhaust pushrod seats .874" .750" 1.575" X1061L-2
Vertical locking bar for .904”diameter lifter bores, with .210”offset left intake and exhaust pushrod seats .904" .815" 1.595" X1269L-2
Chevrolet 90° V-6 78-86, 200-229-262 (4.3L) cu. in.
VerticallockingbarforH.D.aluminumcylinderblockorironblockswithV-8type lifterboreoiling .842" .750" 1.575" 11519-2
PUSHROD
SEAT
HEIGHT
Lifter
Body Dia.
Follower
Wheel Dia.
The pushrod seat heights listed are measured
from the bottom of the follower wheel to the
bottom of the pusrod seat
Pushrod Seat
Height
Crane Classic
Part No.
Ultra Pro
Series Part No.
866-388-5120 • 386-236-9983 FAX 299