SonTek/YSI Argonaut-XR Technical Manual - HydroScientific West
SonTek/YSI Argonaut-XR Technical Manual - HydroScientific West
SonTek/YSI Argonaut-XR Technical Manual - HydroScientific West
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>SonTek</strong>/<strong>YSI</strong><br />
record containing time, velocity, signal strength, standard deviation, heading, pitch, roll,<br />
temperature, pressure, and several other parameters. All of the data contained in these files can be<br />
accessed by the data conversion programs discussed in Section 6. The binary file format is<br />
described in detail in the <strong>Argonaut</strong> Operation <strong>Manual</strong>.<br />
When using ARGONAUT to collect data, you have the option to also store data internally on the<br />
<strong>Argonaut</strong> recorder. ARGONAUT does not affect any <strong>Argonaut</strong> settings that relate to the internal<br />
recorder; these are left in the same state during data collection, as they were when ARGONAUT was<br />
started. The most common reason to use the internal recorder while collecting data with<br />
ARGONAUT is for a backup in case of computer malfunction or power loss. To do this, you should<br />
use a terminal emulator (e.g., SONTERM.EXE) to set the <strong>Argonaut</strong> recorder to ON.<br />
5.6. Associated Configuration and Log Files<br />
There are several configuration and log files associated with the operation of ARGONAUT.<br />
ARGONAUT Associated Configuration and Log Files<br />
File Name Function<br />
ARG.LOG Records all communication between computer and <strong>Argonaut</strong> in an ASCII text file; this file is<br />
overwritten each time ARGONAUT is run. Information recorded here can be useful when<br />
looking for errors in data collection.<br />
ARGUSER.SET Records settings for all user parameters; overwritten each time ARGONAUT is exited. This<br />
file is only used if the computer is unable to communicate with the <strong>Argonaut</strong> upon start up.<br />
DISPLAY.SET This binary file records the most recent graphical display settings from data acquisition<br />
mode.<br />
ARGCONF.SEN This file specifies the <strong>Argonaut</strong> hardware configuration parameters, and is included with the<br />
system software (§5.1).<br />
USERCONF.CMD This ASCII text file is used with the -c command line option (§5.2).<br />
ARGFILE.DEF This ASCII text file is used for automatic file recording with the -f or -g command line<br />
options (§5.2).<br />
<strong>Argonaut</strong> Software <strong>Manual</strong> (March 1, 2001) 51