Ektron CMS400.NET User Manual

Modifying a Single Cell
Modifying Several Cells
NOTE
Working with Table Cells
If you want to make any of the modifications described in this
section to a single cell, follow these steps.
1. Place the cursor in that cell.
2. Right click the mouse.
3. Select Set Cell Properties from the menu.
4. Make the changes on the Cell Properties dialog.
5. Click Update.
If you want to make any of the modifications described in this
section to several cells, follow these steps.
Most procedures in this section tell you to select Cell Properties from the right
click menu. To perform an action on several cells, select Set Table Properties
from the right click menu, then click the Cell Properties tab.
1. Place the cursor anywhere in the table.
2. Right click the mouse.
3. Select Set Table Properties from the menu.
4. Click the Cell Properties tab.
5. Select the cells that you want to change. Hold down the
key while selecting.
As you select a cell, its color changes from light to dark gray.
Ektron CMS400.NET User Manual, Version 7.5 557