Ektron CMS400.NET User Manual

Inserting a Cell
Working with Table Cells
When you set a cell width, there is no guarantee that the cell will
occupy that width when displayed in a browser. This is because the
cell is part of a column, and changes to other cells in the column
can affect the cell whose width you set. Setting cell width only
guarantees that the cell will not be less than the width you specify.
If you want to ensure that a cell’s size does not change, set all cells
in a column to that width.
To specify a cell’s width, follow these steps.
1. Place the cursor in the cell whose width you want to set.
2. Right click the mouse.
3. Click Table from the menu.
4. Click Cell Properties from the menu.
5. The Cell Properties dialog box appears.
6. In the layout section of the dialog box, enter the cell width at
the Width field. You can enter the width in pixels or percentage.
These choices are explained in “Specifying Table Width” on
page 732.
7. Click OK.
To insert a cell, follow these steps.
Ektron CMS400.NET User Manual, Version 7.5 747