TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

ETHNT. [CALLI 223]
1 . ETCSW
1 .ETKSW
2 .ETAR1
3 . ETAR2
Contains the channel status and channel ID .
ET.CST (Bits 0-8) contains the channel status. If
the ET.CON flag in ET.CST is on, the channel is
online. ET.CID (Bits 9-35) contains the channel
ID.
Contains the status and ID of a controller.
ET.KST (Bits 0-8) contains the controller status.
If the ET.KON flag in ET.KST is on, the controller
is online. ET.KID (Bits 9-35) contains the
controller ID.
Contains the first function-specific argument.
Function-specific arguments are described in each
of the function codes below.
Contains the second function-specific argument .
Valid function codes for .ETFCN are:
Code
1
Symbol
.ETOPN
~eaning
Opens a user portal. This function requires
JP.POK privileges. This function specifies the
protocol type to be enabled, and protocol specific
flags. The argument block is:
Word
a
1
2
3
Symbol
.ETFCN
.ETPSW
.ETCIW
.ETPIW
Contents
Contains the function code .ETOPN
in Bits 9-17, and the length of
the argument block, 4, in the
right half.
Contains the portal-id in Bits
9-35. Returns an updated portal
status in Bits 0-8.
Identifies the Ethernet channel
on which the protocol should be
enabled.
Identifies the protocol type to
be enabled on the Ethernet
channel. Set the ET.PAD flag in
the left half of .ETPIW to enable
padding for the protocol.
2
.ETCLS
Closes a user portal and releases all resources
associated with it. The argument block contains:
Word
a
1
Symbol
.ETFCN
.ETPSW
Contents
Contains the function code .ETCLS
in Bits 9-17, and the length of
the argument block, 2, in the
right half.
Contains the portal-id in Bits
9-35. Returns an updated portal
status in Bits 0-8.
22-130