TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

TRMOP. [CALLI 116]
15 . TORSC
16 . TOELE
17 . TOEAB
Rescans an input line .
Sets the terminal element to the number stored in
.TOAR2 (obsolete).
Enables autobaud detection .
20 .TOISC
Inputs a character from the terminal to
waiting in character mode if no
available.
the ac;
input is
21 . TOTYP
22 . TOGMS
Puts an ASCIZ string into the terminal's input
buffer; the address of the string is in .TOAR2. A
string of more than 300 characters results in a
range error.
Returns terminal's MIC status bits in addr+2. If
MIC is not controlling the job, addr+2 contains O.
The status bits are as follows:
Bits
o
Symbol
TO.CHK
1 TO.CCT
2 TO.OCS
3 TO.ECS
4 TO.CPT
5 TO.CBT
6 TO.STL
7 TO.LMM
8 TO.LUM
9 TO.C10
10 TO.CAT
11 TO.RSP
12 TO.RSY
13 TO. LOG
14 TO.LUI
15-21 TO.AOC
22-28 TO.AEC
29-35 TO.MMJ
Meaning
Flag bit for word. If this bit
is set, there are other set bits
in the word.
A CTRL/C was typed.
An operator-sent character was
received.
An error character was received.
A CTRL/P was typed.
A CTRL/B was typed.
Silence this line.
Line is in monitor mode.
Line is in user mode.
Line is in column 1 on output.
A CTRL/A was typed.
Error response.
Response code sync.
MIC is logging.
Controlling job should do a
JOBSTS UUO for the controlled job
or terminal.
The received operator character
(ASCII) .
The received error character
(ASCII) .
MIC master job number.
23 . TOSMS
24 . TOCLR
Sets the terminal's MIC status bits to the
contents of .TOAR2. The bits are the same as
those returned by the .TOGMS function above.
Clears the MIC status bits.
25 . TODSP
Displays an ASCIZ string on the terminal.
address of the string is in .TOAR2.
The
26 . TOGMR
27 . TOLOG
Returns the MIC response buffer. The address of
the 21-word buffer is in .TOAR2.
Returns the MIC log buffer. The address of the
21-word buffer is in .TOAR2.
22-441