TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

GETTAB TABLES
.GTPRV - Job Privilege Flags
GETTAB Table 6
CONTENTS
One word for each job running on the system, giving the privilege bits
for the job.
INDEXED BY
Job number.
Monitor Table
JBTPRV
CALLING SEQUENCE
MOVE ac, [XWD jobno, .GTPRV]
GETTAB ac,
error return
normal return
In the calling sequence, jobno is the number of a logged-in job.
-1 for the current job.
1==================================================1
1 Job privilege bits I
1==================================================1
Privilege bits for each job are as follows:
Use
Bits
o
1-2
3
4
5
6-9
10
11
12
13
14
15
16
17
Symbol
JP. IPC
JP.DPR
JP.MET
JP.POK
JP.CCC
JP.HPQ
JP.NSP
JP.ENQ
JP . ADM
JP.RTT
JP.LCK
JP.TRP
JP.SPA
JP. SPM
Privilege
IPCF privilege.
Highest disk priority for the job (a value in the
range 0 to 3) .
METER. privilege.
POKE. privilege.
Privilege to change CPU specification with either a
command or a monitor call.
Highest high-priority queue available to the job (a
value in the range 0 to 17 octal) .
Device unspooling privilege.
ENQ/DEQ privilege (allows you to use -2 (.EQFGL) in
the ENQ. block to set global privileges) .
System Administrator privilege (job can change REACT
accounting files) .
RTTRP privilege.
LOCK privilege.
TRPSET privilege.
PEEK and Spy privilege for any core.
PEEK and Spy privilege for monitor core.
Bits in the right half are reserved for customer definition.
23-12