TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

TRMOP. [CALLI 116]
1020
1021
1022
1023
1024
1025
1026
1027
1030
. TOTAP
. TOXNF
.TOSTP
.TOPSZ
. TOPCT
. TOBLK
. TOALT
. TOAPL
. TORSP
Returns, in the ac, the papertape-enable bit for
the terminal (1 In bit 35 if papertape is enabled,
otherwise ac=O) . To set this bit, use
. TOTAP+. TOSET; the monitor reads the bit from
.TOAR2. Refer to the SET TTY monitor command in
the Commands Manual.
Process XON/XOFF signals from the terminal.
Returns, in the ac, the bit setting for paged
display mode (1 in bit 35 if the terminal is in
paged display mode, otherwise ac=O). To set this
bit, use .TOXNF+.TOSET; the monitor reads the bit
from .TOAR2.
Returns, in the ac, the output-stopped bit for the
terminal (1 in bit 35 if output has stopped,
otherwise ac=O). The output-stopped bit is set
when, for example, the terminal reaches its page
limit.
Obsolete.
Use .TOLNB or .TOSSZ instead.
Returns, in the ac, the value of the page
(in the range 0 to 63).
counter
Returns, in the ac, the bit setting for blank line
handling (1 in bit 35 if multiple blank lines are
to be reduced to one blank line, otherwise ac=O).
To set the bit, use . TOBLK+.TOSET; the monitor
reads the bit setting from .TOAR2.
Returns, in the ac, the bit setting for ESCape
(altmode) character handling (1 in bit 35 if no
conversion, 0 if the ASCII codes 175 and 176 are
converted to 033) . To set the bit, use
.TOALT+.TOSET; the monitor reads the bit setting
from .TOAR2.
Returns, in the ac, the bit setting for APL mode
(1 in bit 35 if-rn APL mode, otherwise ac=O). To
set the bit, use .TOAPL+.TOSET; the monitor reads
the bit setting from .TOAR2.
Returns, in the ac, the code for the terminal's
receive speed-.- To set the code, use
.TORSP+.TOSET; the monitor reads the code from
.TOAR2. The codes and their meanings ~re:
Code Symbol Speed
1 .TOO05 50 baud.
2 .TOO07 75 baud .
3 . T0011 110 baud.
4 .TOO13 134.5 baud.
5 .TOO15 150 baud.
6 .T0020( 200 baud.
7 .T0030 300 baud.
10 .T0060 600 baud.
11 .T0120 1200 baud.
12 .T0180 1800 baud .
13 . T0240 2400 baud.
14 .T0480 4800 baud .
15 . T0960 9600 baud.
16 . TOEXA External A.
17 . TOEXB External B.
22-446