TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

GETTAB TABLES
.GTPPN -
Project-programmer Number
GETTAB Table 2
CONTENTS
One word for each job running on the
project-programmer number (PPN) for the job.
system, giving the
INDEXED BY
Job number or segment number.
Monitor Table:
JBTPPN
CALLING SEQUENCE
MOVE ac, [XWD jobno, .GTPPN]
GETTAB ac,
error return
normal return
In the calling sequence jobno is the number of a logged-in job (use -1
for the current job) or a high-segment number (use -2 for the current
high segment) .
1=======================================================1
1 Project-programmer number 1
1=======================================================1
The project-programmer number is the job's PPN or the segment
PPN.
owner's
If the high segment's file is in an SFD, this word is returned as
O"path-pointer, where path-pointer is a pointer to a path block in
monitor memory. PEEK privileges are required to read the monitor's
path block.
23-8