TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

GETTAB TABLES
.GTGTB -
GETTAB Immediate Using Range Tab1e
GETTAB Table 155
CONTENTS
Data for each GETTAB table.
INDEXED BY
Item number.
Monitor Table:
NUMTAB
CALLING SEQUENCE
MOVE ac, [item]
GETTAB ac,
error return
normal return
In the calling sequence, item is the mnemonic name of the table whose
data is required.
1=======================================================1
I GETTAB table data 1
1=======================================================1
The word gives the following information for each GETTAB table:
Bits
0-8
9-11
Symbol
SL.MAX
SL.TYP
Meaning
If SL.TYP is 1, 2, 3, or 4, this field is the largest
item number in the table. If SL.TYP is 5, this field
is the index into the range table.
Type of table:
Value
o
1
2
3
4
5
Symbol
.SLNIC
.SLIXI
.SLIXJ
.SLIXS
.SLIXP
.SLIXR
Not included in this system.
Indexed by item number.
Indexed by job number.
Indexed by job number or segment
number.
Indexed by job number; data in PDB.
Indexed by item number. Range may
not be 0 to length -1.
12-13
14-17 SL.MAC
18-35 SL.ADR
Reserved for use by DIGITAL.
A monitor accumulator number.
If SL.TYP=I,2,3,5, this halfword contains the
executive mode address of the table; if SL.TYP=4,
this halfword contains the offset to PDB. If SL.TYP
is 5, this halfword is the executive mode address of
offset 0 into the table.
23-130