TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

SETLCH [TTCALL 7,]
22.151 SETLCH [TTCALL 7,]
FUNCTION
Sets the line characteristics for your job's controlling terminal.
The line characteristics can be read using the GETLCH call.
CALLING SEQUENCE
SETLCH
return
[XWD flags,lineno]
The flags, stored in Bits 0-17, are described below.
The lineno, stored in Bits 18-35, is the numeric portion of the
terminal name, (such as 37 for TTY37) or a UDX (such as .UXTRM+37 for
TTY37) .
If you give a negative number for lineno, the current user terminal is
assumed. Flags can be changed only for the job's controlling
terminal.
The flags are:
Bit
2
13
14
15
16
17
RETURN
Symbol
GL.DSP
GL.LCM
GL.TAB
GL.LCP
GL.PTM
GL.NEC
Characteristic
Terminal is a display (CRT) terminal.
Terminal in lowercase mode.
Terminal has tab capability.
Local copy only (no echo) .
The CTRL/Q papertape switch is on.
No echo from program.
The line characteristics are set as requested. The argument block is
not changed.
RELATED CALLS
o
o
GETLCH
TRMOP.
COMMON PROGRAMMING ERRORS
Using an ac in the calling sequence.
22-383