TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

GETTAB TABLES
.GTLOC - Remote Station Number
GETTAB Table 26
CONTENTS
One word for each job running on the system, giving the station
(ANF-10 network node) number for the job. This is the node at which
the job is logically located (LOCATE call and monitor command) .
INDEXED BY
Job number.
Monitor Table:
JBTLOC
CALLING SEQUENCE
MOVE ac, [XWD jobno, .GTLOC]
GETTAB ac,
error return
normal return
In the calling sequence, jobno is the number of a logged-in job. Use
-1 for the current job or use 0 for the ANF-10 node number of the
central station.
1=======================================================1
1 Network node number I
1=======================================================1
23-38