TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

LLMOP. [CALLI 220]
1 .LMICF
Interrupt channel flags, in the form:
Bits
o
12-17
Symbol
LM.AIC
LM. ICH
Meaning
Assigns the interrupt channel
given in LM.ICH when lit.
Contains the PSI channel to
interrupt when the loopback
message arrives.
22.81.5 FUNCTION 4 (.ELABT)
Aborts the loop request.
The argument block is:
Word
o
3
Symbol
.LMCID
.LMREQ
Contents
Channel ID, where bits 34 and 35 contain the value
of the Ethernet port to use.
Request number. The right half, LM.REQ, contains
the number of the request to be aborted.
22.81.6 FUNCTION 5 (.ELSTS)
Obtains status of Ethernet loopback requests.
The argument block is:
Word
o
Symbol
.LMCID
Contents
Channel ID, where bits 34 and 35 contain the value
of the Ethernet port to use.
1
. LMSTF
Status code for the request .
LM.RTC, contains one of the
codes:
The right half,
following status
Code Symbol Status
2
3
. LMCST
.LMREQ
0 .LMPND Request pending, incomplete.
1 .LMSUC Request was
successfully.
completed
2 .LMABT Request aborted.
3 .LMTXF Transmit failed.
4 .LMCCE Channel communication error.
Status returned from the KLNI port driver .
Request number. The right half, LM.REQ,
the number of the request to be aborted.
contains
22-219