TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

PISYS. [CALLI 136]
-7 .PCACK
-10 .PCARI
-11 .PCPDL
An address check occurr.ed; the status word
contains the device name.
An exceptional arithmetic condition occurred.
A pushdown list overflow occurred.
-12 .PCNSP
The DECnet NSP. monitor
occurred. Refer to the NSP.
call
UUO.
interrupt
-13 .PCNXM
-14 .PCAPC
-15 . PCUEJ
-16 .PCXEJ
-17 .PCKSY
-20 .PCDSC
-21 .PCDAT
-22 .PCWAK
-23 .PCABK
-24 .PCIPC
-25 .PCDVT
-26 .PCQUE
A reference to nonexistent memory occurred.
A line-frequency clock tick occurred while the
job was running. Note that this does not mean
an interrupt occurs on every clock tick, but
only on those that occur while the job is being
serviced by the CPU. The status word contains
the date and time in universal format.
A fatal error occurred for the job .
An external condition caused a fatal error for
the job.
A KSYS (end of timesharing) warning occurred;
the status word contains the number of minutes
left until KSYS.
The dataset status changed.
An ATTACH or DETACH monitor call was executed.
For ATTACH the status word contains the
Universal Device Index number for the terminal.
For DETACH the status word contains -1.
A WAKE monitor call was executed; the status
word contains the job number of the waker.
An address break condition occurred.
An IPCF packet is in your job's input queue; the
status word contains the associate variable.
DECnet logging event occurred. Returns DR. xxx
conditions, indicating that an event occurred
that the DECnet management layer must handle.
One or more resources requested by an
ENQ. monitor call is now available; the status
word contains the inclusive OR of the
request-ids of the granted requests.
-27 .PCNET
-30 .PCJBI
The ANF-10 network topology changed.
obtain the state of the network
NODE. monitor call.
Cross-job interrupt.
You can
using a
-31 .PCDTC
Date/time changed. The offset from the previous
UDT is returned in the status word. This offset
should be added to a previously stored UDT.
22-319