TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

TRMOP. [CALLI 116]
1073 . TOOFL
1074 . TOECH
Returns offline bit. If 0 is returned in the ac,
the terminal exists. This is a read-only
function.
Returns echo status. If set, echoing is enabled.
This can be set by the user.
1075 . TOAPC
Returns asynchronous port characteristics.
is a read-only function.
Code Symbol Meaning:
0 . TOUNK Unknown.
1 . TOHWD Hard-wired.
2 . TODSD Dataset line.
3-4 Reserved
5 . TOADL Auto-dial.
6 Reserved.
7 . TONRT NRTSER line.
10 . TOLAT LAT line.
11 . TOCTM CTERM line.
This
1076 . TOUNP
1077 . TOESC
1100 . TOSWI
1101 . T08BT
1102 . T08BI
1103 . TOQOT
Enables unpause character; continues output after
CTRL/S. (The enabled character is interpreted, on
input, like CTRL/Q.)
Enables ESCape character (behaves like ESC key).
In other words, the enabled character is
interpreted, on input, as the ESCape character,
(ASCII character 033) .
Enables two-character switch sequence.
Enables 8-bit terminal processing .
Enables 8-bit I/O mode on a terminal .
Enables the terminal quote (AV) character. This
character, when combined with any other character,
behaves as a single character. A AV-character
combination is deleted by a single rubout, and
echoes as one character. AV suppresses special
action on the next character you type. The
character is echoed without being processed.
1104 . TOMXT
Returns maximum idle time before an
disconnect. This can be set by a
[1,2]/JACCT or POKE. privileges.
automatic
user with
1105 . TOADT
1106 . TOCLE
1107 . TOEDT
1110 . TOTTN
1111 . TOTCN
Returns time remaining before
disconnect. This cannot be set by the
Enables command-level echoing.
Enables edit buffer (reserved for DIGITAL) .
Returns the terminal type name (model name) .
Returns the terminal class name (read-only)
automatic
user.
22-449