TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

GETTAB TABLES
.GTSTS - Job Status Word
GETTAB Table 0
CONTENTS
One word for each job running on the system, giving the status word
for the job. (There 1S a second job status word in GETTAB table
.GTST2, Number 117.) The bits in the job status word may vary from
monitor to monitor; therefore you should not reference .GTSTS in a
program that is monitor-independent.
INDEXED BY
Job number or segment number
Monitor Table:
JBTSTS
CALLING SEQUENCE
MOVE ac, [XWD jobno, .GTSTS]
GETTAB ac.,.
error return
normal return
In the calling sequence, jobno is the number of a logged-in job (use
-1 for the current job) or a high-segment number (use -2 for·the
current high segment) .
1=======================================================1
1 Job status 1
1=======================================================1
The only documented bit in this word is JS.XO (Bit 25), which
indicates a program that is execute-only. Refer to the Monitor Tables
descriptions for more information about the job status bits.
23-6