TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

DIAG. [CALLI 163]
22.32.18 FUNCTION 22 (.DISSM)
Sets IPA channel (CI20 or NIA20) maintenance mode.
argument block is:
The format of the
addr: XWD CPUno, .DISSM
controller-device-code (Bits 0-6)
22.32.19 FUNCTION 23 (.DIICH)
Clears IPA channel maintenance mode.
is:
The format of the argument block
addr: XWD CPUno, .DIICM
controller-device-code (Bits 0-6)
22.32.20 FUNCTION 24 (.DISBD)
Execute S-bus diagnostic function (SBDIAG).
argument block is:
The format of the
addr: XWD CPUno, .DISDB
To-memory word
From-memory word
In the argument list, you can supply the following information:
o
CPUn is the CPU number.
o To-memory word, where, on a successful return from the UUO,
the monitor places the updated word into this argument.
o
The monitor writes the From-memory word into addr+2.
22.32.21 FUNCTION 25 (.DIDSN)
Returns a unit's device serial number.
addr: EXP .DIDSN
SIXBIT /device/
Serial number (word 0)
Serial number (word 1)
The monitor returns the serial number in addr+2 and addr+3.
22.32.22 FUNCTION 26 (.DIRUR)
Reads the UNIBUS register.
addr: EXP .DIRUR
register-address
In the argument list, you supply the address of the UNIBUS register.
The monitor returns the contents of the UNIBUS register in the ac.
22-77