TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

LLMOP. [CALLI 220]
5 .LMCIF Control information, in the form:
Bits
26
27
28-35
Symbol
LM.BDV
LM.BSV
LM.PRO
Meaning
Specifies the boot device,
where 0 indicates the system
default, and 1 represents a
specified device.
Specifies the boot server,
where 0 is the system default,
and 1 indicates requesting a
system.
Specifies the processor to
boot. 0 indicates the system
processor, and 1 represents
the communication processor.
6 .LMDID Device ID in an 8-bit byte string.
7 . LMSID Software ID in an 8-bit byte string .
22.81.11 FUNCTION 12 (.RCRPY)
Reads the response to a request ID or Read Counters function. The
format of the argument block is the same as for .ELRPY. .LMSRC
contains the address of the responding node. .LMRBL contains the
returned message length, and .LMRBP contains a pointer to the response
buffer.
22.81.12 FUNCTION 13 (.RCRSV)
Transmits a reserve remote console MOP message. The argument block
contains .LMCID, .LMDST, and .LMPWD, as described in function . RCRBT.
22.81.13 FUNCTION 14 (.RCREL)
Transmits a release remote console MOP message.
contains .LMCID and .LMDST.
The argument block
22-221