TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

GETTAB TABLES
.GTSLF - GETTAB Table Data
GETTAB Table 23
CONTENTS
Data for each GETTAB table.
INDEXED BY
GETTAB table number.
Monitor Table:
NUMTAB
CALLING SEQUENCE
MOVE ac, [XWD table, .GTSLF]
GETTAB ac,
error return
normal return
In the calling sequence, table is the symbolic name of the table whose
data is required.
Word Symbol Map
I=============================================~====I
0,,23 .GTSLF 1 GETTAB table data 1
1===================================================1
The word contains one word for each GETTAB table.
following information:
The word gives the
Bits
0-8
Symbol
SL.MAX
Meaning
If SL.TYP is 1, 2, 3, or 4, this field is the largest
item number in the table. If SL.TYP is 5, this field
is the index into the range table.
9-11
SL.TYP
Type of
table.
Value
Symbol
0
1
2
3
4
5
12-13
14-17
18-35
.SLNIC
. SLIXI
.SLIXJ
.SLIXS
. SLIXP
.SLIXR
SL.MAC
SL.ADR
Not included in this system.
Indexed by item number .
Indexed by job number.
Indexed by job number or segment
number.
Indexed by job number; data in PDB .
Indexed by negative and positive
offsets (item numbers) .
Reserved for DIGITAL.
A monitor accumulator number.
If SL.TYP=l, 2, or 3, this halfword
contains the executive mode address
of the table. If SL.TYP=4, this
halfword contains the offset in
job's PDB. If SL.TYP is 5, this
halfword is the executive mode
address that would correspond to
offset 0 in the table.
23-35