TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

DIAG. [CALLI 163]
The sub-function codes are:
Code
o
1
2
3
Symbol
. DICGT
.DICRL
.DICPT
. DICRO
Function
Gets counters .
Releases counters.
Points to counters.
Reads counters .
22.32.36 FUNCTIONS 110-111 (Reserved for DIGITAL)
22.32.37 FUNCTION 112 (.DIWCM)
writes CI maintenance data (defined in KLPSER) .
22.32.38 FUNCTION 113 (.DIRCM)
Reads CI maintenance data (defined in KLPSER) .
SKIP RETURN
The specified function has been performed. Information returned in
the argument list and/or the accumulator is described for each
function listed above.
ERROR RETURN
The ac is unchanged if the DIAG. monitor call is not implemented on
the -System. Otherwise, one of the following error codes is returned
'in the ac:
Code
1
2
3
4
5
6
7
10
11
12
13
14
15
16
17
20
21
22
23
24
25
26
27
30
Symbol
DIANP%
DIAIA%
DIAIC%
DIAIU%
DlAAA%
DIADM%
DIAAJ%
DIAFC%
DlAAU%
DIACP%
DIAIF%
DIAVC%
DIANC%
DIANR%
DIABA%
DIACI%
DIATO%
DIANK%
DIARF%
DIANM%
DIAPN%
DIANU%
DlAAF%
DIADF%
Meaning
Not enough privileges.
Illegal number of arguments.
Illegal controller number.
Illegal unit number.
Some units already assigned.
Unit not in diagnostic mode.
Unit assigned to another job.
Not enough free core.
No assigned units.
IOWD crosses page boundary.
Illegal function.
Job must not be virtual.
No such CPU.
CPU not running.
Invalid argument list.
No CI port on specified CPU.
The Read Port Counters function timed out.
No NI port on specified CPU.
Microcode reload failed.
No microcode available.
CI or NI port not running.
Non-existent UNIBUS address.
Attach function failed.
Detach function failed.
22-81