24.12.2013 Views

TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

TRMOP. [CALLI 116]<br />

2000-2777<br />

Set parameters. These functions are not<br />

explicitly listed in the descriptions below. To<br />

set a parameter, use the corresponding Read<br />

function plus the offset .TOSET (=<strong>10</strong>00). For<br />

example, to set a terminal's receive speed, use<br />

the receive speed function plus .TOSET:<br />

.TORSP + .TOSET<br />

3000-3777<br />

Reserved for customer-defined functions.<br />

The function codes and their meanings are:<br />

Code<br />

1<br />

2<br />

3<br />

4<br />

5<br />

6<br />

7<br />

<strong>10</strong><br />

11<br />

12<br />

13<br />

Symbol<br />

.TOSIP<br />

. TOSOP<br />

.TOCIB<br />

. TOCOB<br />

. TOOUC<br />

.TOOIC<br />

. TOOUS<br />

. TOINC<br />

.TOIIC<br />

. TODSE<br />

. TODSC<br />

Function<br />

Takes the error (non-skip) return if the<br />

terminal's input buffer is empty. The ac is<br />

unchanged.<br />

Takes the error (non-skip) return if the<br />

terminal's output buffer is empty. The ac is<br />

unchanged.<br />

Clears the terminal's input buffer.<br />

Clears the terminal's output buffer .<br />

Outputs a character to the terminal; the cha~acter<br />

is right-justified in bits 28 to 35 of .TOAR2.<br />

Outputs an image-mode character to the terminal;<br />

the character is in bits 28 to 35 of .TOAR2.<br />

Outputs an ASCIZ string to the terminal; the<br />

address of the string is in .TOAR2. If the job<br />

number at the receiving terminal is different from<br />

your job number, the character string is limited<br />

to 128 characters. If you attempt to send more<br />

than 128 characters to a job other than your own,<br />

characters may be lost.<br />

Inputs a character from the terminal in line mode;<br />

the character is stored right-justified in bits 28<br />

to 35 of the ac.<br />

Inputs an image-mode character from the terminal;<br />

the character is stored in bits 28 to 35 of the<br />

ac. This function is not implemented by the<br />

monitor.<br />

Enables a modem (dataset) for outgoing calls.<br />

This function always takes the skip return, but it<br />

is not implemented by the monitor.<br />

Enables and places outgoing calls on a modem with<br />

a dialer. A telephone number of up to 17 decimal<br />

digits is stored in 4-bit bytes 1n . TOAR2 and<br />

. TOAR3 (terminated by a 17). If the caller must<br />

wait for a second dial tone (for example, after<br />

dialing 9), a 5-second wait is indicated by a 16<br />

byte.<br />

14<br />

. TODSF<br />

Disconnects a call<br />

modem) .<br />

(for example, hangs up a<br />

22-440

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!