TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

SCHED. [CALLI 150]
400030 .SCSSO
Sets the CPU scan order.
fcnarg should appear as:
The argument list at
Word
o
1
Symbol
. SCBC'r
.SCBSO
Con'tents
Word coun't .
Scan order for CPUO.
The number of CPUs is spec'ified in . SCBCT . A word
for each CPU follows the count (starting at
fcnarg) containing a code that specifies the scan
order for the cPU. A 0 indicates that the scan
order is [HPQ,PQl,PQ2]. A 1 indicates that CPU
has the scan order [HPQ,PQ2,PQl].
31 .SCRRT
400031 .SCSRT
32 .SCRFG
Reads dormant segment retention time (in jiffies) .
The monitor returns retention time at fcnarg
(. SCBRT) .
Sets dormant segment retention time. The monitor
reads retention time from fcnarg (.SCBRT).
Reads the free core goal. The monitor returns the
free core goal at fcnarg in the following format:
\'1ord Symbol Meaning:
0 .SCBFG Minimum free core size (goal) .
1 .SCBFL Maximum free core size.
Both .SCBFG and .SCBFL are percentages of user
core as determined when the system was booted.
400032 .,SCSFG
Sets the free core goal. The monitor reads the
goal from fcnarg: in the format given in function
.SCRFG.
SKIP RETURN
The function has been performed.
ERROR RETURN
One of the following error codes is returned in the ac:
Code
Symbol
Error
1 SCHAC%
2 SCHUF%
3 SCHUJ%
4 SCHNP%
5 SCHUC%
6 SCHUQ%
7 SCHNC%
10 SCHEB%
11 SCHMI%
12
13 SCHNH%
14 SCHFN%
15 SCHIC%
16 SCHUO%
Address check.
Unknown function code.
Unknown job.
Not enough privileges.
Unknown class.
UnknovTn queue.
Nonexistent channel.
Bad exponential factor.
Cannot set protection if MCUINT is nonzero.
Obsolete.
Not 100%.
Fairness not positive.
Illegal CPU number specified in function .SCSSo.
Unknown scan order specified in function .SCSSo.
22-365