TOPS-10 Monitor Calls Manual Volume 2 AA-K039D ... - Trailing-Edge

LLMOP. [CALLI 220]
22.81.14 FUNCTION 15 (.RCSND)
Sends ASCII console command data to a remote console and polls for
response data. If no command data is included, the function only
polls for response data. The argument block is:
Word
o
Symbol
.LMCID
Contents
Channel ID, in the form:
Bits Symbol Meaning:
16 LM.CBF
17 LM.MNO
34-35 LM.CID
Command break flag. If this
bit is set, a break condition
in the serial byte stream
precedes the corrunand data
buffer.
Message number, which is a
one-bit sequence number,
indicating the current Console
Requestor command message.
Channel ID.
1-2
3
4
5
.LMDST
.LMREQ
.LMRBL
.LMRBP
Destination address.
Request number, as described in .ELDIR.
Length of console request buffer. The right half,
LM.MBL, contains the maximum buffer length.
Pointer to the remote console data buffer.
22.81.15 FUNCTION 16 (.RCPOL)
Polls for completion of the Send Console Command function. The
argument block is:
Word
o
Symbol
.LMCID
Contents
Channel ID and returned flags, in the form:
Bits Symbol Meaning
7
15
16
LM.RDL
LM.RDO
LM.CDL
Indicates that received data
was lost. The flag is set by
the local requestor if the
response data buffer was too
small to receive the data from
the remote node.
Indicates that response data
was lost, due to a buffer
overrun or error condition.
Indicates that command data
was lost. This flag is set if
command data in the Console
Command message was lost. The
remote server sets this bit.
22-222