Denon AVR-3313 Manual - Audio Products Australia

REC OUT mode
• When using the audio/video recording connectors (MEDIA PLAYER
outputs), you can record the audio or video from a different program
source while listening to the currently played track.
• For the connection method, see “Connecting a media player”
(vpage 20).
1
Press ZONE2 / REC SOURCE until “RECOUT
SOURCE” is displayed.
• To cancel, press ZONE2 / REC SOURCE until
“ZONE2 SOURCE” is displayed.
• Make a test recording before starting the
actual recording.
• Sources selected with the REC OUT mode
are output from ZONE2 as well.
• The operable buttons on the remote control
unit in REC OUT mode while it is in the
operating mode for ZONE2 are as follows:
• ZONE SELECT buttons
• MUTE button (:)
• VOLUME button (df)
2
Press
ZONE2 / REC SOURCE to choose the input
source to be recorded.
ZONE2 SOURCE ZONE2 CBL/SAT ZONE2 DVD
····
····
RECOUT DVD RECOUT CBL/SAT RECOUT SOURCE
3
Start recording.
• For operating instructions, refer to the respective device’s
operating instructions.
NOTE
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
• Input sources for which “Hide” is selected at “Hide Sources”
(vpage 127) cannot be selected.
• To record video signals through this unit, use the video cable for
connection between this unit and the player.
99