Denon AVR-3313 Manual - Audio Products Australia

nnConnecting a player compatible with the Denon Link HD function
By making a Denon Link HD connection to a player compatible with the Denon Link HD function, you
can enjoy higher quality playback compared with when only the HDMI connector connection is made.
For the playback method, see “Playing a Blu-ray Disc player compatible with Denon Link HD”
(vpage 37).
Blu-ray Disc player
Denon
Link HD
HDMI
OUT
HDMI function
This unit supports the following HDMI functions:
Connecting an HDMI-compatible device
nnAbout 3D function
This unit supports input and output of 3D (3 dimensional) video signals of HDMI.
To play back 3D video, you need a TV and player that provide support for the HDMI 3D function and a
pair of 3D glasses.
NOTE
• When playing back 3D video, refer to the instructions provided in the manual of your playback device
together with this manual.
• When playing back 3D video content, the menu screen or status display screen can be superimposed
over the image. However, the menu screen or status display screen cannot be superimposed over
certain 3D video content.
• If 3D video with no 3D information is input, the menu screen and status display on this unit are displayed
over the playback video.
• If 2D video is converted to 3D video on the television, the menu screen and status display on this unit
are not displayed correctly. To view the menu screen and status display on this unit correctly, turn the
television setting that converts 2D video to 3D video off.
nnAbout 4K function
This unit supports input and output of 4K (3840 x 2160 pixels) video signals of HDMI.
When a device supporting 4K is connected, use a cable compatible with “High Speed HDMI cable” or
“High Speed HDMI cable with Ethernet”.
nnHDMI control function (vpage 95)
This function allows you to operate external devices from the unit and operate the unit from external
devices.
NOTE
• The HDMI control function may not work depending on the device it is connected to and its settings.
• You cannot operate a TV or Blu-ray Disc player/DVD player that is not compatible with the HDMI control
function.
• The HDMI ZONE2 function is not compatible with the HDMI control function.
Input connector setting
When using this connection, set “DIGITAL” in “Input Assign” (vpage 125) to “D.LINK”.
nnAbout Content Type
This function was added with the HDMI standard. It automatically makes settings suitable for the videooutput
type (content information).
NOTE
To enable the Content Type, set “Video Mode” to “Auto” (vpage 121).
12