Denon AVR-3313 Manual - Audio Products Australia

Graphic EQ
Use the graphic equalizer to adjust the tone of each speaker.
“Graphic EQ” can be set when “MultEQ ® XT” setting (vpage 116) is “Graphic EQ”.
Setting items
Speaker Selection
Select whether to adjust
tones for individual speakers
or for all speakers.
Adjust EQ
Adjust tones for each
frequency band. Adjust
the speaker selected in
“Speaker Selection”.
Curve Copy
Copy “Audyssey Flat”
(vpage 116) curve from
MultEQ ® XT.
Set Defaults
The “Graphic EQ” settings
are returned to the default
settings.
Setting details
Audio
Default settings are underlined.
All : Adjust the tone of all speakers together.
Left/Right : Adjust the tone of left and right speakers together.
Each : Adjust the tone of each speaker.
q Select the speaker.
w Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
• Select the speakers you want to adjust when “Left/Right” or “Each”
is selected.
e Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Yes : Copy.
No : Do not copy.
• “Curve Copy” is displayed after Audyssey ® Setup has been performed.
• When you select “Curve Copy” and press ENTER, the “Copy “Audyssey
Flat”?” prompt is displayed. Select either “Yes” or “No”, and press
ENTER.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
When you select “Set Defaults” and press
ENTER, the “Reset to the default values?”
prompt is displayed. Select either “Yes” or
“No”, and press ENTER.
118