Denon AVR-3313 Manual - Audio Products Australia

More documents

Recommendations

Info

Connections Important information Make connections before using this unit. To create a home theater that can play back higher quality video and audio by fully utilizing the capabilities of this unit and your video devices, connect this unit to each of your video devices with HDMI cables. nnHDMI-compatible device If your video device does not support HDMI connections, use the following connection. nnHDMI-incompatible device This unit can change the source that is assigned to the DIGITAL AUDIO IN and COMPONENT VIDEO IN connectors. You can change the source for connectors listed in Input connector setting within pages that describe connections for devices. For details on assigning a source to connectors, see “Changing the source assigned to connectors” (vpage 14). For the setting method, see “Input Assign” (vpage 125). NOTE • The menu screen is only displayed on TV connected to this unit via HDMI. If your TV is connected to this unit via other video output connectors, perform menu operations while seeing the display on this unit. • Do not plug in the power cord until all connections have been completed. However, when the “Setup Assistant” is running, follow the instructions in the “Setup Assistant” (C page 7) screen for making connections. (During “Setup Assistant” operation, the input/output connectors do not conduct current.) • When running the “Setup Assistant” (C page 7), turn off the power supply of connected devices. • When making connections, also refer to the operating instructions of the other devices being connected. • Be sure to connect the left and right channels properly (left with left, right with right). • Do not bundle power cords together with connection cables. Doing so can result in noise. nnHDMI-compatible device vpage 9 vpage 11 vpage 11 vpage 11 vpage 11 vpage 11 vpage 11 nnHDMI-incompatible device nnOthers vpage 15 vpage 16 vpage 17 vpage 18 vpage 19 vpage 20 vpage 21 vpage 22 vpage 23 vpage 24 vpage 27 vpage 84 vpage 28 5
Converting input video signals for output (Video conversion function) This unit is equipped with three types of video input connectors (HDMI, Component video and video) and three types of video output connectors (HDMI, Component video and video). This function automatically converts various formats of video signals input to this unit into the formats used to output the video signals from this unit to a monitor. GFlow of video signals for MAIN ZONEH Important information Make Settings as Necessary • If you do not want this unit to convert video signals automatically, use the following setting item to disable this function. “Video Conversion” (vpage 121) • If you want to change the resolution of video signals output to the TV, use the following setting item to do so. “Resolution” (vpage 122) Video device Output HDMI connector HDMI signal Component video signal Input (IN) HDMI connector This unit Output (MONITOR OUT) HDMI connector HDMI signal Component video signal HDMI-compatible TV Input HDMI connector HDMI-incompatible TV • The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60 formats. • Resolutions of HDMI-compatible TVs can be checked at “Video” – “Monitor” (vpage 142). NOTE • The menu screen is only displayed on TV connected to this unit via HDMI. If your TV is connected to this unit via other video output connectors, perform menu operations while seeing the display on this unit. • HDMI signals are digital. HDMI signals cannot be converted into analog signals. • When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate. • The HDMI ZONE function is only compatible with the HDMI 1-6 IN connectors. It is not compatible with the HDMI 7 IN connector. Component video connectors Component video connectors Component video connectors Component video connectors Video signal Video signal Video connector Video connector Video connector Video connector For example, if you connect this unit to an HDMI-compatible TV with a single HDMI cable, this unit automatically converts input signals other than HDMI video signals to HDMI signals to output from the HDMI connector to the TV. This unit outputs only one type of video signals, so video signals output from this unit to the TV remain unchanged even if you switch to a device that outputs another type of video signals for playback. Therefore, you do not need to switch the video input on the TV. Furthermore, this unit converts the input analog video signals such as video and component video signals to high resolution digital HDMI video signals for output, improving the quality of the video. If your TV does not support HDMI connections, connect this unit to TV with analog video connectors. This unit can not convert HDMI input signals to analog video signals, so when inputting from an HDMI device, use component video or video input connectors. 6
Page 1 and 2: AVR-3313 INTEGRATED NETWORK AV RECE
Page 3 and 4: n NOTES ON USE WARNINGS • Avoid h
Page 5 and 6: Accessories Check that the followin
Page 7: Basic version Basic version Here, w
Page 11 and 12: Connecting an HDMI-compatible devic
Page 13 and 14: Connecting this unit to a TV via HD
Page 15 and 16: nnConnecting a player compatible wi
Page 17 and 18: Connecting an HDMI-incompatible dev
Page 19 and 20: Connecting a set-top box (Satellite
Page 21 and 22: Connecting a Blu-ray Disc player Th
Page 23 and 24: Connecting a media player • This
Page 25 and 26: Connecting a CD player You can enjo
Page 27 and 28: Connecting an FM antenna • Connec
Page 29 and 30: Connecting an external control devi
Page 31 and 32: Connecting the power cord After com
Page 33 and 34: 1 Prepare the included setup microp
Page 35 and 36: Set up speakers (Audyssey® Setup)
Page 37 and 38: Error messages Set up speakers (Aud
Page 39 and 40: Playback (Basic operation) Setup (v
Page 41 and 42: Playing a Blu-ray Disc player compa
Page 43 and 44: nnSetting Browse mode (Operation Mo
Page 45 and 46: Playing a USB memory device Playing
Page 47 and 48: Playing a USB memory device nnUSB m
Page 49 and 50: nnChanging the tuning mode (Tune Mo
Page 51 and 52: Presetting broadcast stations nnTun
Page 53 and 54: nnSpecify a name for the preset bro
Page 55 and 56: Cancelling preset skip 1 While 2 Us
Page 57 and 58: nnTP search TP identifies programs
Page 59 and 60:
Network contents Listening to inter
Page 61 and 62:
nnUsing vTuner to add Internet radi
Page 63 and 64:
Applying media sharing settings Her
Page 65 and 66:
Operations available through the OP
Page 67 and 68:
Listening to Last.fm Last.fm radio
Page 69 and 70:
Using online services nnLast.fm ope
Page 71 and 72:
nnViewing all photographs on Flickr
Page 73 and 74:
Performing repeat playback (Repeat)
Page 75 and 76:
nnDeleting content added to favorit
Page 77 and 78:
nnPerform iTunes playback operation
Page 79 and 80:
nnListening mode • The following
Page 81 and 82:
Selecting a listening mode Operatio
Page 83 and 84:
Selecting a listening mode Audyssey
Page 85 and 86:
Installation/connection/setup of sp
Page 87 and 88:
Speaker connection Here, we connect
Page 89 and 90:
Connecting 6.1-channel speakers usi
Page 91 and 92:
Connecting front A/B speakers You c
Page 93 and 94:
Connecting front speakers with a bi
Page 95 and 96:
Set up speakers around items indica
Page 97 and 98:
Use o p to set whether or not a 10
Page 99 and 100:
HDMI control function If the HDMI c
Page 101 and 102:
Quick select function You can save
Page 103 and 104:
Web control function You can contro
Page 105 and 106:
Various memory functions Personal m
Page 107 and 108:
w Zone playback by audio output (PR
Page 109 and 110:
How to make detailed settings Menu
Page 111 and 112:
Examples of menu screen displays Ty
Page 113 and 114:
Inputting characters On this unit,
Page 115 and 116:
Audio Make audio-related settings.
Page 117 and 118:
Audio Setting items Delay Time 0ms
Page 119 and 120:
Audio Audio Delay Default settings
Page 121 and 122:
Graphic EQ Use the graphic equalize
Page 123 and 124:
Video Picture Adjust Default settin
Page 125 and 126:
Setting items i/p Scaler Convert th
Page 127 and 128:
Inputs Perform settings related to
Page 129 and 130:
Inputs Setting items DIGITAL Set th
Page 131 and 132:
Video Source Inputs Default setting
Page 133 and 134:
Manual Setup Default settings are u
Page 135 and 136:
Setting items Distances Set distanc
Page 137 and 138:
Speakers 2ch Playback (Continued) S
Page 139 and 140:
Network Information Display network
Page 141 and 142:
Network Setting details nn Proxy se
Page 143 and 144:
General Language Set the language f
Page 145 and 146:
General Information Show informatio
Page 147 and 148:
Setting items Add New Feature Displ
Page 149 and 150:
nnRemote control operation modes By
Page 151 and 152:
Operating external devices Press th
Page 153 and 154:
nnVCR/DVR group (2zzzz) (DVD record
Page 155 and 156:
Information Informations Here, we l
Page 157 and 158:
With the door open For buttons not
Page 159 and 160:
Rear panel See the page indicated i
Page 161 and 162:
Inserting the batteries q Slide the
Page 163 and 164:
Surround This unit is equipped with
Page 165 and 166:
Surround Sound Mode (vpage 75) Surr
Page 167 and 168:
Sound Mode (vpage 75) NOTE ANALOG P
Page 169 and 170:
Relationship between video signals
Page 171 and 172:
Explanation of terms A Adobe RGB co
Page 173 and 174:
P Progressive (sequential scanning)
Page 175 and 176:
Symptom Cause/Solution Page When th
Page 177 and 178:
GiPod / USB memory device / Interne
Page 179 and 180:
Resetting the microprocessor Perfor
Page 181 and 182:
Index vvNumerics 2.1-channel···
Page 183 and 184:
List of preset codes AVR D Denon 73
Page 185 and 186:
G Goodmans 11037 H Hitachi 11037 L
Page 187:
V00 www.denon.com D&M Holdings Inc.
show all

Denon AVR-3313 Manual - Audio Products Australia

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?