Denon AVR-3313 Manual - Audio Products Australia

Input Assign
This unit has certain input sources such as “CBL/SAT” assigned to audio and video connectors by default.
By making the default connections, you can simply press an input source select button to play back audio
or video from the connected device with ease.
When making connections other than the default settings, you must change settings in this section.
Examples of “Input Assign” menu screen displays
This screen appears when the “Inputs” – “each input source” – “Input Assign” menu is selected. Use
the “Input Assign” menu to change the w HDMI input connectors, e Digital input connectors, and r
component input connectors that are assigned to the q input sources in default settings.
q
Inputs/Input Assign [1/2]
Set Defaults
CBL/SAT
DVD
Blu-ray
GAME
MEDIA PLAYER
TV AUDIO
AUX2
HDMI
HDMI1
HDMI2
HDMI3
HDMI4
HDMI5
None
HDMI7
DIGITAL
COAX1
COAX2
D.LINK
None
None
OPT1
None
COMP
COMP1
COMP2
None
None
None
None
None
Changes HDMI input assignments
w e r
Input assignments menu operations
1
Use uio p to move the cursor to the item you want to set, and
then press ENTER.
2
Use o p to select the input connector to be assigned.
3
Press ENTER to register the setting.
Setting items
HDMI
Set this to change the HDMI
input connectors assigned
to the input sources.
CBL/SAT DVD
Blu-ray GAME
AUX1 AUX2
MEDIA PLAYER CD
TV AUDIO
Setting details
HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6 / HDMI 7 : Assign
an HDMI input connector to the selected input source.
None : Do not assign an HDMI input connector to the selected input
source.
• At time of purchase, the settings of the different input sources are as
shown below.
Input
CBL/SAT DVD Blu-ray GAME AUX1
source
Default
setting
Input
source
Default
setting
HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 7
AUX2
MEDIA
PLAYER
CD
TV AUDIO
HDMI 6 HDMI 5 None None
Inputs
• An input source to which an HDMI input connector cannot be assigned
is displayed as “– – –”.
• To play the video signal assigned at “HDMI” combined with the audio
signal assigned at “Input Assign” – “DIGITAL”, select “Digital” at “Input
Mode” (vpage 127).
• The audio signals input from the analog and digital connectors are not
output to the monitor.
• When “HDMI Control” (vpage 121) is set to “On”, HDMI input
connector cannot be assigned to “TV AUDIO”.
125