30.08.2014 Views

Denon AVR-3313 Manual - Audio Products Australia

Denon AVR-3313 Manual - Audio Products Australia

Denon AVR-3313 Manual - Audio Products Australia

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Specifications<br />

nn<br />

<strong>Audio</strong> section<br />

• Power amplifier<br />

Rated output:<br />

Front:<br />

125 W + 125 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)<br />

165 W + 165 W (6 Ω, 1 kHz with 0.7 % T.H.D.)<br />

Center:<br />

125 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)<br />

165 W (6 Ω, 1 kHz with 0.7 % T.H.D.)<br />

Surround:<br />

125 W + 125 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)<br />

165 W + 165 W (6 Ω, 1 kHz with 0.7 % T.H.D.)<br />

Surround back / Front height / Front wide:<br />

125 W + 125 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)<br />

165 W + 165 W (6 Ω, 1 kHz with 0.7 % T.H.D.)<br />

Dynamic power: 130 W x 2ch (8 Ω)<br />

190 W x 2ch (4 Ω)<br />

Output connectors:<br />

6 – 16 Ω<br />

• Analog<br />

Input sensitivity/Input impedance: 200 mV/47 kΩ<br />

Frequency response:<br />

10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)<br />

S/N:<br />

102 dB (IHF–A weighted, DIRECT mode)<br />

Distortion:<br />

0.005 % (20 Hz – 20 kHz) (DIRECT mode)<br />

Rated output:<br />

1.2 V<br />

• Digital<br />

D/A output:<br />

Rated output — 2 V (at 0 dB playback)<br />

Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)<br />

S/N ratio — 102 dB<br />

Dynamic range — 100 dB<br />

Digital input:<br />

Format — Digital audio interface<br />

• Phono equalizer (PHONO input — MEDIA PLAYER OUT)<br />

Input sensitivity:<br />

2.5 mV<br />

RIAA deviation:<br />

±1 dB (20 Hz to 20 kHz)<br />

S/N:<br />

74 dB (A weighting, with 5 mV input)<br />

Rated output:<br />

150 mV<br />

Distortion factor: 0.03 % (1 kHz, 3 V)<br />

nnVideo section<br />

• Standard video connectors<br />

Input/output level and impedance:<br />

Frequency response:<br />

• Color component video connector<br />

Input/output level and impedance:<br />

Frequency response:<br />

nnTuner section<br />

(ANTENNA input — MEDIA PLAYER)<br />

1 Vp-p, 75 Ω<br />

5 Hz – 10 MHz — 0, –3 dB<br />

Y (brightness) signal — 1 Vp-p, 75 Ω<br />

PB / CB signal — 0.7 Vp-p, 75 Ω<br />

PR / CR signal — 0.7 Vp-p, 75 Ω<br />

5 Hz – 60 MHz — 0, –3 dB<br />

[FM]<br />

(Note: μV at 75 Ω, 0 dBf = 1 x 10 –15 W)<br />

Receiving Range:<br />

87.5 MHz – 108.0 MHz<br />

Usable Sensitivity:<br />

1.2 μV (12.8 dBf)<br />

50 dB Quieting Sensitivity: MONO 2.8 μV (20.2 dBf)<br />

S/N (IHF–A weighted) : MONO 70 dB<br />

STEREO 67 dB<br />

Total harmonic Distortion: MONO 0.7 % (1 kHz)<br />

STEREO 1.0 % (1 kHz)<br />

nnGeneral<br />

Power supply:<br />

AC 230 V, 50/60 Hz<br />

Power consumption:<br />

670 W<br />

Power consumption in standby mode: 0.1 W<br />

Power consumption in CEC standby<br />

mode:<br />

0.5 W<br />

Power consumption in network<br />

standby mode:<br />

2.7 W<br />

For purposes of improvement, specifications and design are subject to change without notice.<br />

177

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!