Denon AVR-3313 Manual - Audio Products Australia

Playing a Blu-ray Disc player compatible with Denon Link HD
NOTE
• Set the Blu-ray disc player’s “Denon Link” setting to “On”. For
instructions on operation, refer to the Blu-ray disc player’s manual.
• When a Blu-ray disc is played with the input mode set to “Auto”,
playback is performed in the Denon Link HD mode.
• When the input mode is set to “HDMI”, normal HDMI playback is
performed.
Playing Super Audio CD
The following describes the procedure for playing Super Audio CD.
1
Prepare for playback.
q Turn on the power of the subwoofer
and player.
w Load the disc in the player.
2
Press
POWER X to turn on power
to the unit.
3
Perform the settings of the “Input Assign” menu
(vpage 125).
Assign HDMI connectors for the input source(example: DVD).
4
Press the input source select button (example: DVD)
to switch an input source assigned in step 3 - q.
5
Set the audio input mode to “Auto” using the “Input
Mode” menu (vpage 127).
• The default setting of “Input Mode” is “Auto”.
6
Play the component connected to this unit.
The indicator lights on the display.
Playing a CD player
The following describes the procedure for playing CD player.
1
Prepare for playback.
q Turn on the power of the subwoofer
and player.
w Load the disc in the player.
2
Press POWER X to turn on power
to the unit.
3
Press CD to switch the input
source to “CD”.
4
Play the CD player.
When playing back Super Audio CD, DSD signals are converted into
PCM signals which are then converted into analog signals.
38