Denon AVR-3313 Manual - Audio Products Australia

Use o p to set whether or not a
10 subwoofer channel is measured,
and then press ENTER.
NOTE
Set up speakers
After performing Audyssey ® Setup, do not change the speaker
connections or subwoofer volume. In event of a change, perform
Audyssey ® Setup again.
Measure
Skip
Set for measuring a subwoofer.
Set for no measuring of a subwoofer.
Use o p to set whether or not a surround back
11 channel is measured, and then press ENTER.
Measure
(2spkrs)
Measure
(1spkr)
Skip
Set for measuring two surround back speakers.
Set for measuring a surround back speaker.
Set for no measuring of a surround back speaker.
Use o p to set whether or not a front height channel
12 is measured, and then press ENTER.
Measure
Skip
Set to measure the front height speakers.
Set when you do not want to measure the front height
speakers.
Use o p to set whether or not a front wide channel is
13 measured, and then press ENTER.
Measure
Skip
Set to measure the front wide speakers.
Set when you do not want to measure the front wide
speakers.
Press o or BACK.
14 Proceed to page 31 Preparation step 5.
94