Denon AVR-3313 Manual - Audio Products Australia

Installation/connection/setup of speakers (Advanced)
Procedure for speaker settings
Speaker installation
Speaker connection (vpage 84)
Set up speakers (vpage 92)
Speaker installation
• Determine the speaker system depending on the number of speakers
you are using and install each speaker and subwoofer in the room.
Here, we explain how to install the speakers using a typical example.
• The speaker impedance should be from 6 to 16 Ω.
This unit is compatible with Audyssey DSX ® (vpage 168) and
Dolby Pro Logic gz (vpage 168), which offers an even wider
and deeper surround sensation.
When using Audyssey DSX ® , install front wide speakers or front
height speakers.
When using Dolby Pro Logic gz, install front height speakers.
Use the illustration below as a guide for how high each speaker should
be installed. The height does not need to be exactly the same.
Front height
speaker
• Point slightly
downwards
At least
1 m
Front
speaker
z1
Front wide
speaker
z2
45˚
Surround
speaker
60 – 90 cm
GViewed from the sideH
z1 Recommended for Dolby Pro Logic gz
z2 Recommended for Audussey DSX ®
Surround back
speaker
• Point slightly
downwards
NOTE
You cannot have audio output from the surround back speakers, front
height speakers and front wide speakers simultaneously.
82