Denon AVR-3313 Manual - Audio Products Australia

Playing back files stored on a PC and NAS
Use this procedure to play music files, image files or playlists.
1
Prepare for playback.
q Check the network environment, then turn on this unit’s
power (vpage 27 “Connecting to a home network
(LAN)”).
w If settings are required, make the “Settings” (vpage 137).
e Prepare the computer (vComputer’s operating
instructions).
2
Press NETWORK.
3
Use
uio p to select “Media
Server”, then press ENTER.
Network
nnAdjusting the sound quality (Restorer)
Make this setting at “Restorer” (vpage 115) in the menu.
You can use the “Restorer” function to restore to a state close
to the audio before compression while correcting the bass feel to
enjoy a richer playback experience. The default setting is “Mode
3 (Low)”.
nnSwitching the screen display
Press STATUS on the main unit.
The display switches between track title, artist name, and album
title each time the button is pressed.
nnGoing back to the previous screen
Press o or BACK.
nnChanging the screen display duration
Make this setting at “Audio Display” (vpage 123) in the menu.
The default setting is “30s”.
Press uio p while the display is off to return to the original
screen.
Playing back files stored on a PC and NAS
• When a WMA (Windows Media Audio), MP3 or MPEG-4 AAC file
includes album art data, the album art can be displayed while the
music files are playing.
• If you use Ver.11 or later of Windows Media Player, the album art for
WMA files can be displayed.
• WMA Lossless files can be played when using a server supporting
transcoding, such as Windows Media Player Ver. 11 or later.
NOTE
• Depending on the size of the still picture (JPEG) file, some time may
be required for the file to be displayed.
• The order in which the tracks/files are displayed depends on
the server specifications. If the tracks/ files are not displayed in
alphabetical order due to the server specifications, searching by the
first letter may not work properly.
Favorites Internet Radio Media Server
4
Use ui to select the server including the file to be
played, then press ENTER or p.
5
Use ui to select the search item or folder, then
press ENTER or p.
6
Repeat step 4 until the file is displayed.
7
Use ui to select the file, then press ENTER or p.
Playback starts once buffering reaches “100%”.
61